mini  exhibit  anti-theft  devicce


Product Overview

 The mini exhibits anti-theft device is an integrated circuit design, automatic microcomputer controlled .For the currently IT store, shopping malls showcase, personal shops frequently appear laptops, MP3/MP4, digital camera, GPS navigation, mobile hard disk, etc. stolen precious commodities research and development, the product is simple to operate, regardless of computer, mobile phones, cameras and other electronic goods are plug boot can work properly to achieve the anti-theft alarm. Once the product off or cut lines, high-decibel alarm can be issued immediately, and a red light flashes.

  

Product Parameter

Type	mini exhibits anti-theft device
Operating   voltage	3V
Bi tone output	85±5DB at 1ft
Stand-by current consumption	1.0uA (typical)
Activation current consumption	28mA(typical)
Alarm mode	Break paste head off alarm
battery	3V button battery(built in)
material	ABS
Host size	4cm*1cm*1cm
Wire diameter	0.2cm
The charging function	You can charge the 5V digital product output
color	White/black

   

Product operating step

1. Tear off the 3M adhesive tape of the paste the pasted on the  sample or exhibits.

2. Tip the host of 3M tape, paste hidden places in the showcase or shelf.

3. Open the master switch, enter the armed state.

                               

 

You can disarm the alarm when use tip of a ballpoint

pen tip or other items poke out slider switch button,

 

The advantage of product: 

 

1. Sound light alarm, high decibel alarm deter theft and make he does not close.

2. Separate built-in power, not external power cord. Easy to install, simple to operate, it can be installed one minute into the armed state.

3. Heads 3M adhesive paper pasted on the product surface residues are not nasty glue marks.

4. Alarm against the surrounding waves and other signal interference.