1. All parameters NOT specially mentioned are measured at 230VAC
input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"
twisted pairwire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load
regulation.
4. The power supply is considered a component which will be
installed into a final equipment. The final equipment must be re-
confirmed that it still meets EMC directives.
5. If the power supply is short-circuited under no load, it will
recover automatically when short-circuit is removed.