Wireless 3.5 inch cctv test monitor with 150m transmission without block
TYL-W305LCD

FEATURES    
1. Receiver with 3.5" Active Matrix TFT LCD screen
2. High brightness daylight viewable display
3. Receiver with video level measurement (IRE)
4. Receiver with 6 hours rechargeable (AA) batteries
5. Transmit video signal by 2.4G Hz (4 CH available)
6. Transmitter with 2.5 hours rechargeable battery
7. Transmitter with BNC video input jack
8. Mini 150m transmission without block
9. Suitable for CCTV camera and other video devices
10. Portable trouble shooting tools for testing security camera during installation
11. LED backlight provides longer life    
12. Low power consumption

SPECIFICATION    

Receiver    
Display:     3.5" High Contrast Active Matrix TFT LCD screen
Video formats:     PAL and NTSC
Resolution:      320(RGB)*240
Viewing angle:     (40/60/60/60) (up/down/left/right)
Brightness:     250cd/m2
Contrast    : 350: 1
Response time:     25ms
Video level and impedance:     1.0 V p-p 75ohm
Audio speaker:     1W
Receiving frequence:     2400-2483 MHz
Demodulation mode:     FM
Standing-wave ration:     2: 1
Antenna terminal impedance:     50Ω
LO control mode:     PLL
LO frequence stableness:     +/-100kHz
Frequence precision:     +/-200kHz
Receiving sensitivity:     -90dBm (max)
LO leak:     -45dBm (max)
Wireless transmission distance:     100-150m
Frequence supported (MHz):     CH1=2414; CH2=2432; CH3=2450; CH4=2468
OSD language:     Chinese / English / Italian
AC charger:     Input 110-240V 50/60Hz 0.3A and Output DC 12V/1.5A
Batteries:     AA 1.2V 2500mAH NiMH*4
Battery recharge time:     Approximately 1.5 Hours
Battery life (with full charge):     6 hours continuous operation (12 hours standby)
Power consumption:     3 to 4 watts depending on settings
Working temperature:     32 to 120 degree F
Storage temperature:     0 to 120 degree F
Relative humidity:     5-95%RH
Dimension:     L 118*W 83.5*P 27mm
N. W.:     250g

Transmitter    
Output power:     DC12V+/-0.5V 1000mA
Recharge power:     DC12V+/-0.5V 2000mA
Transmission frequence:     2400-2483MHz
Modulation mode: FM
Terminal impedance:     50Ω
Transmission power:     18dBm+/-1dBm
Wireless transmission:     150-200m
Video impedance:     70Ω
Video level:     1.00.2Vp-p
Video input polarity:     Cathode
Frequence supported (MHz):     CH1=2414; CH2=2432; CH3=2450; CH4=2468
Load supported (max):     DC 12V 800mA
Working temperature:     32 to 120 degrees F
Storage temperature:     0 to 120 degrees F
Relative humidity:     5-95%RH

INCLUDED ITEMS
Monitor
Transmitter
NIMH batteries
Battery charger
Wrist strap
BNC video / RCA audio input cable
RCA AV output cable
DC 12V output cable
Instruction manual
Storage box
Bracket for wall mount (optional)
Carrying case (optional)