| Type: | Parking Lift |
|---|---|
| Height (mm): | 330 |
| Width (mm): | 4500 |
| Place of Origin: | China (Mainland) |
| Brand Name: | APS |
| Model Number: | APS-WL |
| MATERIAL: | Aluminum alloy |
Quick Details
Specifications
Rotating car turntable
High quality and Low price!
We are professional manufacturer of car turntable
Please let us know turntable's diameter, loading weight required, table materials, local voltage, and other requirements, OEM welcome!
1. Advantages
1. Auto show car rotating turntable
2. Car turntable for parking system
3. Rotating any 360 degree
4. Manual operation for stop, start, turn clockwise/reverse, speed up, speed dow);
5. Remote operation for stop, start, turn clockwise/reverse;
6. Low noise, smooth operation
7. High quality produced with rich experiences
8. Suitable for kinds of installation condition, stable for million times of turning;
9. Suitable for all kinds of vehicles
10. Totally customize, OEM welcome
11. Small order acceptable
2. Engineering requirement
1. Reinforced concrete pit is a must beforehand;
2. Drainage pipes wire ducts must be set beforehand in the pit;
We will provide pit foundation drawing with exact dimensions to prepare the pit, drainage and wire route;
We will provide Installation Manual for self-installation finally.
3. Parameters of Turn Table
Item
| ||
Model | APS-WL | Operation: manual (stop, start, turn clockwise/reverse, speed up, speed down); Remote (stop, start, turn clockwise / reverse) |
Diameter (mm) | Φ4500 | |
Total height(mm) | 310±5 | |
Difference of shaft and direction(mm) | ±5 max | |
Turning time (Minutes/round) | 1-5 | |
Transmission mode | Pin tooth | |
Motor powe (kw) | 0.75 | |
Input electricity | 380V/50HZ | |
Load weight (mt) | 3 | |
table | 6mm Aluminum Alloy | Oxidation treatment |
4.Mainparts of Turn Table
order | name | Model, size | unit | quantity | Origin |
1 | Motor gear box | 0.75KW | pc | 1 | Zhejiang,China |
2 | Power control box | 400*500*200 | pc | 1 | China |
3 | Remote controller | pc | 2 | Shenyang | |
4 | Gear box seat | 400*440*12 | pc | 1 | An Steel Plant |
5 | Standing wheel device | 150*240 | pc | 8 | Self-made |
6 | Pin shaft plate(tooth ring) | round | set | 1 | Self-made |
7 | Central seat device | set | 1 | Self-made | |
8 | Structure frame(fan-shaped) | Square pipes 60*40*3, 40*40*3 | pc | 6 | An Steel |
9 | Gear wheel | pc | 1 | Self-made | |
10 | Standing wheel dragging bar | Self-made | |||
11 | Standard parts | Self-made | |||
12 | Paint, packing materials | ||||
13 | Platform (table) | Thread aluminum alloy plate; | 16 | Oxidation treatment |