The IP Intercom/door phone will be designed to work on apartment, hospital, school, metro…Housed
in robust metal body, vandal resistant and tamper-resistant. FDSP ensure voice loud and clear. Good
looking, durable, easy to install, comfortable buttons, and low power consumption. ?Support G.711,G.729, etc. Codec voice intercom Support SIP 2.0(RFC3261) and related RFC protocol Unlock function (swipe or communication) ?
? Visitor leave message
?
?Software upgrading on line
or status
Basic Function
WEB remote management of Terminal malfunction
Calling indoor extension for two-way conversation
Support SIP 2.0(RFC3261) and related RFC protocol
Specification | Communication protocol | SIP 2.0(RFC-3261) | | Master Chip | Broadcom 1190 | | Keys | Design | Stainless steel | | Direct-button | 1 | | Numeric Keypad | Optional | | Voice | Microphone | 1 | | Amplifier | 0.5W-10W | | Speaker | 2W | | Volume Control | Adjustable | | FDSP | Support(AEC) | | Voice stream | Supportable Protocol | RTP/RTSP | | CODEC | G.711, G.729 | | Port | Power Supply | 12V+-15%/1A DC or PoE | | PoE | PoE 802.3af (Class 0 - 12.95W) 48V/380mA | | LAN | 10/100BASE-TX s Auto-MDIX, RJ-45) | | Cables | HSYV or better | | Passive Switch | Normally Open and Normally Closed highest at 30V/1A AC/DC | | Active Switched Output | 12V/500mA DC | | Rs232 | Supported | RFID/IC Card Reader | | Optional
| | Interface | Power supply | 12V+-15%/1A DC or PoE | | PoE | PoE 802.3af(Class 0-12.95W) | | LAN | 10/100BASE-TX s Auto-MDIX,RJ-45 | | Recommended cabling | Cat-5e or higher | | Passiveswetch | NO and NC contacts,up to 30V/1A AC/DC | | Actice switch output | 12V/700mA DC | | Structure | Shell Material | Cold Rolled Steel | | Operating Temperature | -40 C to55 C | Working Condition
Relative Humidity | 10%-95% | | Storage Temperature | -40 C to70 C | | Installation | Embedded installation (pre-burying) | | Size | 159*130*40mm |
|
