Introduction:

Material belt type automatic recorder KC-003, mainly for the factory, design company burning IC design. This scheme solves the most factories use artificial burning efficiency brought low, high rate of bad shortcomings, also in line with the factory, design company requirements for tools of production cost. KC-003 according to the corresponding specifications of the material belt packing IC burning, IC package is mainly used are: SOT23-3/5/6 encapsulation series; SOP8 and SOP10/14/16/20/24/28 SOP package series; in the replacement of different manufacturers of the programmer, you can burn IC from different manufacturers. KC-003 every time you can feed a disc, the menu button operation, automatic operation.

Main features:

1 each could put in a disk to burn the IC to feed position.

2 in the burn after the end, according to the writer the given OK, NG signal, to burn IC burn the test without tear tape, protective film, burn after directly on the placement machine.

3 on the machine parameter adjustment convenient, proper parameters can make the machine run more smoothly, and improve production efficiency.

4 in the presence of burning NG, can set the number of re recording, only a set number of times are NG to determine the NG. Judge NG IC, the need for manual marking processing.

The number 5 can record the burning IC OK and NG. This number can not lose after power failure, convenient production and management.

6 using LCD Chinese menu display, the user interface is friendly.

7 suitable for burning more than IC, the use of a wide range of.

8 this machine used source, easy to use, a burning 1 piece of IC, basic need not artificial, greatly improving the production efficiency.

The main technical indicators

Power supply: 110V/220V

Current: 700mA Max

Environment temperature: 040 C

Humidity: 10%90% no dew

Pressure: 0.4MPa