Product Main

Quick Details

Place of Origin: China (Mainland)
Brand Name: TESTEX
Model Number: FT100

Specifications

 

Application
 
This combined test rig is mainly used for position adjustments of fittings on bedframes, bunk beds and trundle beds, children's cots and folding cots.

This machine fitted with related rigs and actuators also can be widely used for testing of upholstered and seating furniture, tables, beds and bunk beds, mattress, and also can be used for arm chairs, bench, cupboard, etc.

Applications include, for example, adjusting mechanics for the headboards of beds, different height and position adjustments for head rests of seating and upholstered furniture, and the locking function on functional fittings. A drop tester is used for the loading of the fittings.

Control system

The entire system is controlled by a central PLC control system, it stands on fixable plastic wheels and can thus be used as a moveable or stationary system. can connect up to 5 pneumatic or electrical test axes.

The cables for connecting the test axes are built-in. Furthermore it contains a central emergency stop, which can shut off all axes in a hazardous situation. The air conditioning consisting of filter, switch-onvalve and distributor is also situated on the supply terminal. The test axes can be attached via hoses with quick disconnect couplers.

Included:

  • 1 PLC control system with touch panel
  • 1 box frame 2.5 x 2.5m, ca. 2m high, made from 80x80 R&K light weight profiles, screwed and stiffened on the corners with gusset plates
  • 4 vertical and 1 horizontal profiles as crosshead for taking the cylinder, crosshead easily relocatable because of roll guides
  • In the box frame there are 2 stiffened strips of the base plates, relocatable
  • 4 pneumatic test axes for horizontal table testing, load controlled, piston diameter 50mm, stroke 300mm, load up to 1500N, load cell 5kN
  • 1 pneumatic test axis for vertical table testing, load controlled, piston diameter 80mm, stroke 500mm, load up to 2500N, load cell 5kN; fixed on the extension; laterally, relocatable, installed below the traverse member
  • 5 load cells 5kN integrated in the axes
  • Operating pressure and cylinder limit switch control
  • 1 emergency stop button on each test axis

 

 

 

5 loading pads (stability and durability test)

2 edge loading pads (stability and durability test)

3 Impactors (drop/impact test)

 

 

 

12 set of Fixtures and stops (to fix or position beds)

5 Loading actuators (to conduct required test motion)

1 Impactor rig (for drop/impact test)

 

 

 

 

1 Ladder impact rig

frame impactor

 

1 box frame 2.5 x 2.5m, ca. 2m high

1 PLC control system with touch panel

 

 

Specification

 

Most Bed test as below can be carried out in this machine

Hazards test - Entrapment of head, neck and fingers

  •  1 wedge blocksl
  •  1 Hip probel
  •  1 Head probel
  •  1 V and irregular shaped openings templatel
  •  1 Finger probe with hemispherical endl
  •  1 Finger probe with conical endl
  •  1 Conical probel

Strength test of Beds, Bunk beds and Trundle beds

  •  Headboard, Foot board and pull test and Canopy static framel
  •  Distributed load testl
  •  Stability test of bedsl
  •  Static load of safety barriers(side rails, Guardrails)l
  •  Upwards and downwards static loads on bed basel
  •  Impact load of bed base (drop test)l
  •  Durability test of bed edgel
  •  Durability test of bed basel
  •  Static load test on bed basel
  •  Static load test on bed edgel
  •  Durability test of frame and fasteningsl
  •  Bunk bed top bed Stability testl
  •  Fastening of the upper bed to the lower bed (post strength test)l

Ladder test of bunk beds

  •  Ladder Attachment and deflection testl
  •  Treads impact testl