| Output: | Analog Sensor |
|---|---|
| Theory: | Current Sensor |
| Usage: | Magnetic Sensor |
| Model Number: | XQ20 |
| Brand Name: | gfuve |
| Place of Origin: | China (Mainland) |
| ratio: | 1000:1 |
| class: | 0.1 |
| Jaw: | 20mm |
| max current: | 240A |
| weight: | 400g |
| Types: | current sensor |
Quick Details
Specifications
INTRODUCTION:
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
FEATURES
PARAMETERS
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
FEATURES
- Suitable for 10A-100A cable online measurement.
- Holding wire diameter: φ20mm
- Dimension: 52.5mm×136.5mm×28mm
- Load capacity: ≤4Ω
- Installation: clamp type
- Output mode: lead output
| Electrical parameters | |
|---|---|
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2% |
| Primary current | 0 - 200A AC |
| Secondary current | 0 - 200mA AC (customized) |
| Max. Cont. Input current | 240A |
| Load capacity | ≤4Ω |
| Over voltage category | CAT III 600V |
| Output signal | 200mA AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032 |
| Installation | clamp type |
| Output mode | lead output(2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 52.5 x 137.5 x 28 |
| Weight (g) | 400 |
| Holding wire diameter (mm) | φ20 |
| Max. jaw opening (mm) | 20 |