Liquid heat flow meter is used in the industrial flow meter. Embedded liquid heat flow meter is small and tight, through the center of the stainless steel pipe itself is actually element of the sensor. Calorimetry according to the rules, a small portion of the power of this tube is heated so that the temperature is higher than the edge of the tube medium temperature. Liquid thermal flow switch to determine the flow rate of the heat medium flows from the electrical measurements of the output signal is given by a linear and proportional to the flow velocity.
Pipe material must be resistant to corrosion medium. Although other types of metal may also be used, the standard material is stainless steel WN1.4571 (V4A, 316Ti). The built-in meter is completely encapsulated with a resin material, which is relatively robust to withstand vibration and shock. For extremely harsh environmental conditions, an aluminum shell.
Liquid heat flow meter Embedded 4311 liquid flowmeter is used in the industrial flow meter. Embedded liquid heat flow meter is small and tight, through the center of the stainless steel pipe itself is actually element of the sensor.


specifications:
Encapsulation resin material
Firmly compact
Withstand vibration and shock.
For extremely harsh environmental conditions, an aluminum shell.


Measuring range: 0-20 cm / sec to 1-100 cm / sec continuous alignment. (Related to water, for other media, the scope of expansion)
Measuring time:2-10 seconds measurement time, according to measurement conditions
Linearity deviation: <5% (best fit slope)
Repeatability tolerance: <2%
Temperature drift: <3% / K
Power supply voltage: 24V DC ± 10%
Current consumption: 100mA max
Output Current: 4-20Ma
Resistive load:0-600 ohm