Charpy and izod impact testing equipment

Product introduction:

Product type:KL-XJL-5.5D

    This kind of charpy and izod impact testing equipment is mainly used to measure the impact toughness of rigid plastic, reinforced nylon, fiberglass, ceramics, cast stone, insulation materials and other non-metallic materials. It is the ideal testing equipment in the chemical industry, scientific research institutes, universities and quality testing departments.

Features:

   1.The charpy and izod impact testing equipment is a kind of intelligent digital testing machine using the microcomputer technology. It is advanced that it can automatically correct the energy loss caused by friction and windage to modify the energy chart, getting rid of the resistance effect. (The detection of the pendulum energy after specimen fracture and the correction of energy loss are finished during the impact at once)

   2.The test results of charpy and izod impact testing equipment are electrically displayed to make the reading more intuitive, improving the precision and accuracy of the impact machine.

   3.The rotary encoder circular grating angle measurement technology is used by the instrument to display the thrusting energy, impact strength, pre-Yang angle, up angle, the average angle and the energy loss corrected automatically, with the advantages of high accuracy ,good stability and a large measure range.

   4.The main technical parameters of the KL-XJL-5.5D charpy and izod impact testing equipment are strictly in conformity with the standards of ISO 179,GB/T 1043 and JB/T 8762.

Main technical parameters:

  A.charpy impact testing part:

   1.impact velocity:       2.9m/s;3.8m/s;

   2.pendulum energy:    2J,4J,5J

   3.distance from the pendulum center to the specimen center:   221mm

   4.the pendulum tilt angle:    150°

   5.jaws bearing distance:      60mm,70mm,95mm

   6.supporting blade radius: R=1mm

   7.impact blade angle:30°

   8.impact blade radius: R=2mm

   9.Main impact attachment: 2J,4J and 5.5J impact weight

   The pendulum arm used in the instrument is a kind of new material stronger than steel and lighter than aluminum (patent pending).

   B.izod impact testing part:

    1.impact velocity:    3.5m/s

   2.pendulum energy:    1J, 2.75J, 5.5J

   3.the pendulum tilt angle:    150°

   4.distance from the pendulum center to the impact blade:    335mm

   5.distance from the impact blade to the horizontal jaw:    22mm

   6.blade radius:R=0.8mm

   7.The type of the testing specimen should match the requirements of the standard GB1843—80 and ISO180—82 strictly.

   The pendulum arm used in the instrument is a kind of new material stronger than steel and lighter than aluminum (patent pending).

Our company

      Kunlun instrument (China) limited,was founded in 2000 years,our factory in Dongguan City Guangdong Province,is a high-tech enterprise that specified in develop and manufacuring all kinds of testing machine.More than 10 years,Kunlun always insisted on the road  of independent innovation and R&D. By virtue of the leading product technology and perfect quality system, good quality services and productions meeting ASTM, JIS, ISO, IEC, UL, GB and other standards.

The trade show