Seamark ZM hot air smd rework station Specifications and technical parameters  

1	Total Power	4800W
2	Top heater	800W
3	Bottom heater	2nd heater 1200W,3rd  IR heater 2700W
4	Power supply	AC220V±10%     50/60Hz
5	dimension	L810*W500*H690 mm
6	Positioning	V-groove, PCB support can be adjusted in any direction and with external universal fixture
7	Temperature control	(K Sensor) closed loop, independent heating, precision within ±3°
8	PCB size	Max 420*390 mm  Min 20*20  mm
9	Weight	45kg

Main Features of ZM-R590:     Seamark ZM hot air smd rework station

1. Adopt liner slide which makes X,Y,Z axis all can do precision adjustment and fast positioning.

 

2. high-precision temperature controller, built-in PC serial port, external sensor, can be controlled by computer.

 

3. There are 3 independent heating areas from top to bottom. The 1st and 2nd are hot-air heaters, the 3^rd is IR preheating, temperature controlled within ±3 °, Top heater can be adjusted freely, second heater can be adjusted up and down, these heaters can set many groups temperature parameters at the same time,the third IR area can be adjusted the power consumption.

 

4. Offer all kinds of hot-air nozzle, it can rotate 360°,With magnet, easy to install and change, customized is available.

 

5 .Choose imported high-precision K-type thermocouple, closed loop control and automatic temperature compensation system.

 

6. Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled, and it can rework any size of BGA chips.

 

7. Powerful cross-flow fan rapidly cool the PCB board to improve efficiency; Also built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly.

 

8. There is an alarming after weldering&soldering ,and can be setted alarming in advance.

 

9. CE certificate, There are emergency stop and Automatic power-off protection device when abnormal accident happens

  Seamark ZM hot air smd rework station