Applications:

MGY-100BL Hydraulic anchor drilling rig is new generation of hight-efficient hydraulic anchor drilling rig developed based on our MGY-100A and MGY-100B anchor drilling rig which are split-type of anchor drilling rig, can be widely used in the field of municipal construction deep excavation, bolt and cable construction, pipe roof construction, jet grouting hole and so on.

Features:

1.High construction efficiency. As the rig uses a hydraulic chuck with large inner hole, a fixture 6m drill rod in one time, to reduce the numbers of adding and screw-off drill rod and improve the effective working time.

2.As a result of crawler chassis drive, and the rig mast down or up of position adjustment of 400mm. Hole position adjustment time is greatly reduced.

3.The rig has a holder, shackle device. Through cooperation with the operation of the power head chuck, to reduce the operator's labor intensity.

4.The rig adapt to a wide processes. As the rig has a hydraulic chuck with inner hole diameter of Φ110 mm . No need to make any alteration of top-drive head, you can adapt a single tube, double tube, three tube to make jet-grouting, reverse circulation drilling and Φ108 pipe-roof construction.

Technical Specifications

1	Theory hole diameter	Φ110 ～ Φ400
2	theory drilling depth	150 ～ 40 m
3	hole angle range	-20 °～ 90  °
4	drill rod	Φ89 , Φ73, Φ89
		hexagonal drill rod: Φ89x79; Φ70x63
5	Max.torque of top-drive head	6500  Nm
6	rotation speed of top-drive head	1: 35, 70.r/min; 2: 70, 140(r/min)
7	feed/lifting speed	0-0.5    m/s
8	pulling/pushing force	80 / 57   kN
9	Max. feed stroke	1900mm+ 3200mm+ 1100mm=6200mm
10	height of rotation center	Max.2150mm, Min.1750mm, height differential 400mm
11	gripping and screw-off device	Φ120,  240KN, 18KNm.
12	power unit	electric motor/ diesel engine: 30kw
13	climbing angle	30 o
14	crawling speed	1.95  Km/h
15	whole weight	4500  kg
16	Overall dimension(L*W*H) mm	3800 x 2300 x 2000