| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | EPX7500 |
| Model Number: | EPX7500 |
| Detecting Range: | |
| Detecting Depth: |
Quick Details
Specifications
Long Range Gold Metal Detector Diamond Metal Detector EPX7500, Depth Long Range Metal Detector
1. Detect Target: Gold,Silver,Copper,P.G,Tin,Aluminum,Jewel.
2. Detecting Range: 1000m (diameter)
3. Detecting Depth:100M
Specifications
1. Detect Target: Gold,Silver,Copper,P.G,Tin,Aluminum,Jewel.
2. Detecting Range: 1000m (diameter)
3. Detecting Depth:100M
Specifications
long range metal detector EPX7500
1.Detection Depth: 100m
2.Detection Range: 1000m
EPX7500 long range metal detector
Introduction:
The improved sending antenna makes the operation more convenient. Also the adjustable frequency range (Fine-tune) makes the performance more accurate. And
the English operation panel becomes more beautiful.
Long Range King System is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector. This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology
that it uses has proven to be (by far) the most successful.
Features:
1. Detect Target: Gold,Silver,Copper,P.G,Tin,Aluminum,Jewel.
2. Detecting Range: 0-1000m (diameter)
3. Detecting Depth: 0-50m
Components:
1.A black case with aluminum trim, a handle and two locks
2.External Battery Port
3.The Belt Receiver
4.Receiving Rods
5.Battery Charger
6.Antenna
7.Marker Flags
8.English Operation Manual
Specification:
1.Detection Depth: 100m
2.Detection Range: 1000m
3.Rechargeable Battery: Continuous working 48 hours
4.Power: 850mA
5.Frequency: 433Mhz+/-150Khz
6.Inner Storage: EEPROM 16k*8Bit
7.Voltage: 9~12VDC
8.Temperature Range: -40~85
9.Operating Humidity: 0~95% (non-condensing)
10.Ultrasonic Frequency: 400-3000Mhz+/-150Khz
Packaging
| Items per Carton: | 1 Pieces/Carton |
| Package Measurements: | 50X30X20 cm |
| Gross Weight: | 10.0 kg |
How to detect?
1. put half of Antenna (Sending) in the ground
2. Connect Antenna with the machine, and put the Keys in the On/Off Switch on the Transmitter. Turn on the Transmitter
3 .Adjust the Seven Channels to select the detecting target. Turn Horizontal Distance Selector and Vertical Depth Selector to select the detecting range and detecting depth.
4. Adjust the frequency range
5. Turn on the Belt Receiver, and connected with the Antenna (Receiving) Rods. You can set the Belt Receiver on your belt.
6. All the above is Ok and starts to detect. One person takes the Belt Receiver and Antenna (Receiving) Rods, other person takes Mark Flag.Move slowly around the Antenna and the transmitter, it is better 2 feet per second
Walk around the Antenna and the transmitter in a ring. Please refer to the following picture how to walk
7. When the Antenna (Receiving) Rods are crossed, stick one Mark Flag in the ground to mark the cross position
8. First walk around the Antenna and the transmitter in a ring, semi diameter is about 5-10m, to make sure a point
Then, walk around the Antenna and the transmitter in a bigger ring, semi diameter is over 5-10m, to make sure another point.
And the Antenna and the transmitter and the two points are in one line, refer to the below picture:
9. Above is first step detecting, and change the Antenna and the transmitter position, and detect again following the above detecting method, to make sure another line.
The cross of the two lines is the position of the gold. Please refer to the below picture