Product Main

Quick Details

Place of Origin: China (Mainland)
Brand Name: HUWA
Model Number: HW-PED10
Brand Name: HUWA
Model Number: HW-PED10 Drainage Board
Material: HDPE
Color: Black
Size: 2400mm Wx20000mm Lx10mm H
Compressive Strength: 200Kpa

Specifications

Drainage Membrane Dimple Sheet Drainage Sheet Drainage Board
1. Drainage Sheet is a dimpled plastic sheet with applications for:

Internal drainage of basement walls

Creating a capillary break and replacing sub-base in ground slap construction

Waterproofing membrane protection of underground structures

2.Drainage Sheet acts as a barrier to give protection to the waterproofing membrane from backfill. The dimples create a vapour and thermal insulation barrier in both internal walls and adjacent to waterproofing membranes.

3.Drainage Sheet  offers protection against rising damp in ground slaps and replaces traditional lean concrete sub-base slabs without compromising the load-bearing capacity of the sub-base.

4.Drainage Sheet  creates a cavity control layer when placed between the reinforced concrete base and concrete floor surfaces in chemical storage areas allowing continuous monitoring to determine leakage of chemical containers.

 


Applications

Typical areas of application include:

Basement walls

Tunnels

Ground slabs

Hazardous chemical storage areas

Advantages

Diagonal dimple configuration with high compressive strength of 250 kN/m2 (25 t/m2)

Provides an effective protection layer over waterproofing membranes

Acts as a fail-safe drainage system for double-walled underground structures

Approved by German authorities for use in hazardous chemical storage areas

Avoids the need for a sub-base slab in ground slab construction

Wide and easy to handle rolls result in rapid and low cost installation

Specifications

Material: High density polyethylene

Weight: approx. 580 g/m2

Sheet thickness: approx. 0.6 mm

Dimple height: 10 mm

Void volume between dimples: approx. 5.3 l/m2

Drainage capacity: approx. 4.6 l/s.mapprox. 276 l/min.mapprox. 16,650 l/h.m

Compressive strength: approx. 250 kN/m2 (25 t/m2)

Service temperature: -30oC to 80oC

Biological/chemical resistance: Resistant to ground chemicals, rot, moulds, algae, bacteria and root penetration. Does not affect potable water.

 


Technical Information Table

      Model

Standard

HW-PED8

HW-PED10

HW-PED12

HW-PED15

HW-PED20

HW-PED25

HW-PED30

Material

HDPE

HDPE

HDPE

HDPE

HDPE

HDPE

HDPE

Dimple height mm

8

10

12

15

20

25

30

Elongation percentage(%)

25

25

25

25

25

25

25

Tensile strength(N/5cm)

350

350

350

350

350

350

350

Compressive strength(kPa)

200

200

200

150

150

150

150