| Input Voltage(V): | 110V-240V |
|---|---|
| Lamp Power(W): | 10W |
| Lamp Luminous Flux(lm): | |
| Lamp Luminous Efficiency(lm/w): | |
| CRI (Ra>): | |
| Color Temperature(CCT): | |
| Working Temperature(℃): | -10 - 40 |
| Working Lifetime(Hour): | 10000 |
| IP Rating: | |
| Certification: | CE,ROHS |
| Emitting Color: | full color |
| Base Type: | |
| Light Source: | |
| Place of Origin: | China (Mainland) |
| Brand Name: | seeshow |
| Model Number: | iRainbow10FX-Moncha |
| color : | full color |
Quick Details
Specifications
Model:
iRainbow10FX -Moncha
( Small case 10W RGB Moncha mainboard Animation Laser)
Laser diodes:
R637nm/3W
G532nm/3W
B445nm/4W
CNI
Control system :
LCD Panel, Automatic,
Sound active,DMX,,Master/Slave,
60degree scan angle, SD card CTI6215H 60K Scanner,X/Y inverter,ILDA/PC control,
Analog module:10KHz ,
Beam divergence:1.2mrad,
Beam diameter:3-4mm.
(Good cooling system control the fans speed automatically subject to the temperature)
(Free accessories:,Moncha software outside,Emergency Stop controller, Emergency cable 15m, ILDA 15m Cable,Flight case )
Laser size and
N.W.:
31*29.2*29.2cm
16KG
Flight case size and G.W.:
46*41*41cm
38KG
PS:
- Three ways to control: Ethernet, DMX, Stand-alone
- Possibility to add special board with display: external ILDA, safety key support, X and Y invert integrated
- 40kpps maximal scan rate is good even for graphics shows
- Uses standard SD-card with size up to 32GB to store up to 254 complete laser shows
- You can use any SD-card reader to change the contents of card
- You can store up to 20 hours of laser show on one SD-card
- Laser safety - brightness map works also in DMX or Stand-alone mode
- Fades in brightness map
- Color optimization - color balance and fade curves on SD-card (works in DMX or Stand-alone mode)
- Remote control over Ethernet or even Internet (public IP address required) - upload frames and shows, configure stand-alone mode, configure brightness map and color optimization
- DMX 512 output
Packing lists:
1) RGB 10W moncha mian board animation laser *1PCS
2) Moncha software (CD) * 1PCS
3) Power line *1PCS
4) User Manual *1PCS
5) ILDA DB 25 line 15M *1PCS
6) Emergency stop *1PCS
7) Flight case *1PCS