1.Type
JKC - 2006 1   P   F  N C
⑴         ⑵    ⑶ ⑷ ⑸ ⑹ ⑺
⑴ Model Number: JKC
⑵ Type Number:
1004: No. of Filter Cores 10" *4 PCS 2004: No. of Filter Cores 20" *4 PCS
2006: No. of Filter Cores 20" *6 PCS 2008: No. of Filter Cores 20" *8 PCS
2012: No. of Filter Cores 20" *12 PCS 2018: No. of Filter Cores 20" *18 PCS
⑶Pump power: 1HP 2HP 3HP
⑷Material of Pump Body: C-CFRPP P-FRPP K-PVDF
⑸U-In-Outlet Union Type H-In-Outlet Telescopic Type F-In-Outlet Flange Type
⑹Rubber Material: N-NBR E-EPDM V-VITON
⑺C-Filter cores pressplate type B-Filter cores lock nut type
2.Features:
(1)This is special for chemical plating filter.
(2)Filter barrels made by PP material, with the characters of high temperature,acid and alkali resistant.
(3)This adopts to idling type and acid and alkali resistant pump, Therefore it conforms to the characteristics of the chemical plating solution. Let chemical liquid will not sink on the pump and damage the pump.
(4)Simple operation:
a. Feed tank water directly, Ball valve on in-outlet is no need to shut down.
b. The first time after feed tank filled with water,power-on then power-down then water again,repeated three times then normal operation.
c. As long as the first time the air in inlet tube is completely discharge, you can power-on at any time.
(5)After clean the filter cores, it's soon to work.
(6)There is no ball valves between the pump outlet and filter cartridge of the filter, it will not produce liquid crystal because do not use for a long time and lead to unavailable.
3.Specification