SpecificationsSD-YAG 1212-600W carbon steel , stainless steel cut laser cutting steel
1. laser power 680W
2. 6m/min speed
3. Cut to 8mm C.S

SD-YAG 1212-600W carbon steel , stainless steel cut laser cutting steel

 

Soullon laser systems can be equipped with technology that will allow for the successful cutting of sheet metal. Commonly cut metals include stainless steel, mild steel and aluminum.

 

The YAG laser generator developed by Soullon Lasers is one of the key elements to successful metal cutting. Development of YAG laser generator enables stability and precision of the whole machines. The gap between the metal being cut and the cutting nozzle can be adjusted until the desired gap is obtained. As the cutting process begins the height follower will track the contour of the metal and adjust the nozzle in the z axis keeping a constant focus point.

 

High pressure gas assist is injected into the optics assembly which allows the sheet metal to be pierced and results in a clean and smooth cut. A durable steel cutting bed is easily installed in sections. This specially designed cutting bed reduces the amount of surface contact with the metal being cut.

 

Advanced metal cutting features in Soullon's Laser software allows for complete control of the cutting process. Laser dwell delays can be set so that the laser pierces the metal before the motion of the cut begins. Multiple air gas settings can be set for the pierce, cut and jog between parts. Vector Path Control will automatically reduce the speed and laser power as the beam enters sharp corners and tight radiuses.

 

Soullon laser systems are designed to handle different sizes of sheet metal, tube metal.

 

 

 

Technical Item	Parameter
Working area	1200x1200mm
Laser media	ND-YAG
Max laser power	600W
Motor	Servo motor
Min cutting line width	0.15mm
Max location speed	15m/min
Control system	Motion control card and PC
Max equipment power	40KW

 

 

Advantages:

 

Clean and smooth cut:

 

A gas assists through the metal cutting optics nozzle, is needed to pierce through the metal and allows for a clean, smooth cut edge. The use of oxygen or nitrogen allows many metals to be cut with a dross free edge, no deburring required. A lower piercing gas assist pressure can be set in the KCAM software to minimize the chance of pierce blowouts in thicker metals.

 

Laser operating cost

 

Laser cutting is a non contact process with eliminates the high costs of replacement die stamps and machine center re-tooling. Electrical and maintenance costs are minimal and will typically cost less than $2/hours.Soullon laser technicians will train your operators on how to most effectively use the metal cutting capacities.

 

Intricate cutting:

 

With a laser beam cutting kerf of approximately 0.15mm, and a servo motor motion package, Soullon laser systems are capable of producing repetitive, precision cuts. The non-contact laser beam will ensure even the thinnest of metals are not damaged during the cutting process.

 

 

 

 

 

Sample: