| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | SOOKE |
| Model Number: | S453 |
| Size: | 1220x2440mm(4'x8'),1250x2500(4.1'x8.2'), 915x1830(3'x6') or as per your requirement |
| Length/width tolerance: | +/-2mm |
| Thickness: | 4-25mm |
| Thickness Tolerance: | +/-1mm - +/-05mm |
| Number of Plies: | From 5 to 18 depending on thickness |
| Face/Back: | Black, Brown, Red |
| Core: | Poplar, Hardwood, Birch, Combined |
| Glue: | WBP, Melamine, MR |
Quick Details
Specifications
No | Property | Unit | Test Standard | Value of Test | Result | |
1 | Moisture content | % | EN322 | 8-12 | Check out | |
2 | Density | Kg/m3 | EN322 | 560 | Check out | |
3 | Bonding quality | Bonding quality | Mpa | EN314 | Max:1.72 Min:0.85 | Check out |
Damage rate | % | GB/T17656-1999 | 60% | |||
4 | Bending modules of elasticity | Longitudinal | Mpa
Map |
EN310 | 6800 | Check out |
Lateral | 5920 | |||||
5 | Bending strength (N/mm) | Longitudinal | 65 | Check out | ||
Lateral | 50 | |||||
6 | Cycle Life | About 15-20 times repeated using times according projects by formwork application | ||||
1. No warping, no fracture, not out of shape. It can stay 48 hours in boiling water. It has good performance and the recycling times can be more than 30 times.
2. Transference to concrete is set up very easily, so good for construction work. (There is no need for any transference preparation.) It is easily to take off the membrane. It only takes the time 1/7 of the steel mould. It can shorten the project time by 30%.
3. It is good to keep surface warm so in winter the project can also be continued.
4. After installation of concrete, the surface looks like a mirror. (the cement does not stick.)
The wall or the surface of the building can be decorated directly.
5. The film faced plywood can be used to make camber and it also can be cut into small pieces according the special requirements.