Nowadays,  block sawing machines with diamond wire  give many possibilities for further processing raw blocks. Can be used for block trimming and cutting off crust of block.  They have following advantages:
· The wire allows greater sawing heights than large discs. It is possible to cut large block by diamond wire;
· Thinner cutting width, and more precise;
· By virtue of its reliability, adjust the cutting techniques according to different stone material;
· Noise nuisance generated by diamond wire saw is significantly less than produced by other sawing techniques;

·Less noice, less pollution, noise generated by diamond wire saw is much less than discs cutting.

Recommendations:

· The rotation of the wire should be regularly checked.
· The worn condition of beads should be regularly inspected.
· The worn condition of connections & the beads near connections should be regularly checked. Change connections  when it's needed.
· The steel cable tension is set in 250-300kg(Φ4-5mm cable).
· Adjust the linear speed of the wire according to the material being sawn:

· During the sharpening of a new wire, the liner speed should be reduced 2-3 m/s from the above standard.
· Water requirement is between 15-25L/min.

Kindly Noted, when place order please inform the following:

Diameter of the Wire

Wire Type (Plastic or rubber)

Marble Type (Hard, Medium, Soft, or Abrasive)

Quantity (How many Meters)

Wire Saw Machine Power (How many KW or HP of the motor)

Expected cutting speed and life(M2)

Expected shipping date