Specification | Beads /meter | Coating | Product No. | Hardness | Wire Speed (m/s) | Cutting Speed (m2/h) | Life (m2/m) | φ7.2mm φ8.5mm φ9.0mm | 37 | Rubber | HD-GP-R-A | Soft | 25-30 | 10-15 | 14-20 | HD-GP-R-B | Middle | 22-25 | 5-10 | 8-12 | HD-GP-R-C | Hard | 18-22 | 4-8 | 6-10 | φ7.2mm φ8.5mm φ9.0mm | Plastic | HD-GP-P-A | Soft | 25-30 | 10-15 | 14-20 | HD-GP-P-B | Middle | 22-25 | 5-10 | 8-12 | HD-GP-P-C | Hard | 18 -22 | 4-8 | 6-10 |
Description: Diamond wire-saws are suitable for cutting the different kinds of large granite slabs and have the following specialties:
· To produce slabs in very short time
· To get the even and smooth slab
· To involve always low power consume and lesser raw material waste
· To have low- noise and friendly surroundings
· Easy manipulation and with low cost |
Recommendations:
· The rotation of the wire should be regularly checked.
· The worn condition of beads should be regularly inspected.
· The worn condition of connections & the beads near connections should be regularly checked. Change connections when it's needing.
· The cable tension is set in 250-300kg(Φ4-5mm cable).
· Adjust the linear speed of the wire according to the material being sawn:
· During the sharpening of a new wire, the liner speed should be reduced 2-3 m/s from the above standard.
· Water requirement is between 15-25L/min.
|
