Bevel gear operators are designed as multi-turn actuators for applications on globe valve,gate valve and Throttle valve etc. Also sluice gates and any other type requiring linear motion for thrust and torque application.

Product Feature
1.It is driven by a bevel gear and can be separately assembled with valve as a manual valve, and also assembled with electric device and an electric driven valve.
2.Small volume, light weight, and output shaft is tooth scarf jointed with valve.
3. Long life for full close and seal.
4. The output flange accords with standard ISO5210 and can be machined as customers' special requirements.
5. The indication device of open degree is optional.

Product Specification/Models
Model: MY-V0
Output Torque: 589 N.m
Max trust: 127000 N
Ratio: 3.1:1
Max stem diameter: 28 mm
Connected Size: F14(175mm), BHC 140mm
Weight: 21.5 kg
Main Material Housing: ASTM A216 WCB;gear& Worm: steel A576-1045, Aluminium bronze stem nut
Options: Hand wheel, chain wheel, stem covers , Special Coatings

Other Information
Installing procedure
First check whether connecting dimensions of driving sleeve and flange of housing are in accordance with customers' requirements,especially with extended shaft and coupling flange of valve body.
Install the device on the valve after check correctly.

Maintenance
Do not operate the device at the exceed rating condition.
A periodic check, every year should be made to determine condition of the lubricant.