1. Introduction

Smart oil level sensor for accurate measurement of the oil level in tailored, machine with advanced microprocessor core, without any movable or flexible parts, impact resistance, easy installation, high reliability, high precision, good cost performance .Can be installed on various occasions for gasoline, diesel and other oil level for accurate monitoring and control. Also suitable for a variety of non-conductive liquid measurement

2. Features:

1 By setting the tank internal metal capacitor test pole, can accurately measure the amount of oil in the tank, its compact structure, easy installation, testing accuracy;

2 This device structure without mechanical movement, to eliminate the cause due to prolonged use of sliding wear, effectively extending the service life, and do not have hidden catching phenomenon caused by the failure of sensing;

3.Broad applicability can be used directly without changing the current car, motor vehicle fuel instrumentation systems;

4 As part of the circuit is completely isolated from the fuel, it does not appear damaged electronic devices caused safety problems, safer and more reliable than traditional products.

5 This product is fully compatible with all vehicles currently on the market fuel sensor instrumentation, and customized according to user requirements, through software changes the output characteristics

3. Technical indicators:

1 Detection range: Dedicated Tank Capacity    

2 Power supply voltage: 0.8V ~ 4.5V

Connection, installation, fixed way;

3 Electrical connection: Sensor socket and butt plugs dedicated panel meter

4 Installation: Sensors installed in the hole in the fuel tank sensors for

5 Fixed modes: 4 M6 screws in the tank

4.details

Name	Value
Voltage Range	0 ~ 3/0 ~ 5/0 ~ 8V optional
Output	Analog Output
Power voltage	11V ~ 27V
Detection current	Less than 30mA
Detection sensitivity	More than 2mm
Basic error	± 2%
Operating temperature	-25 ℃ ~ +80 ℃
Life	More than 10 million times
length	Can be customized
Flange sizes	Can be customized
installation	Top-mounted
Main material	Stainless steel

5. Precautions

Epoxy potting circuit board, if zero and the voltage at the maximum range does not meet the requirements (not 0V and 8V), first adjust the zero potentiometer so that the voltage at zero back 0.03V, then adjust the span potentiometer allows the maximum range at voltage back to 8V.

Note: Zero potentiometer L voltage decreases, the range of potential L-voltage increases, and vice versa, is no different.

6.Ordering information

1.Voltage range

2.Output

3.Length

4.Flange size