| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | |
| Model Number: | PS04 |
| Usage: | Pressure Sensor |
| Theory: | Resistance Sensor |
| Output: | Analog Sensor |
Quick Details
Specifications
PS04 is ESM series of piezoresistive isolation diaphragm oil filled differential sensor as a signal measuring element seal in stainless steel in the shell structure. which can transfer differential pressure to linearization voltage signal.
1.Feature
Measurement range : 0~6KPa~2MPa
High reliability and stability
Small profile
2.Application Pressure range 0~10KPa~2MPa Zero pressure output ＜2 mV Span pressure output DC100±20 mV Proof pressure of high pressure side 2X rated pressure Proof pressure of low pressure side 2X rated pressure or 1MPa, whichever is less Static pressure ≤20MPa Accuracy ±0.25%(typic) ±0.5%(Max.) Long stability ±0.3%F.S/year (typic) ±0.5% F.S/year(Max.) Pressure Port M12×1 or customize Compensate temperature range 0℃~70℃ Operate temperature range -10℃~80℃ Store temperature range -40℃~100℃ Housing material Stainless steel : 1Cr18Ni9Ti Diaphragm material 316L O-ring material Fluororubber Cable Polyethylene Insulation resistance 100MΩ,100VDC Protection IP65
Measurement pressure of gases and liquids which can compatible with 316L stainless steel
Process control system
3.Spec.
5.Ordering Information
1.In order to ensure that the sensor can safe and reliable operate, you can installed three valves between the sensor and the measured point to ensure that the medium slow and evenly applied to the positive, negative pressure in the cavity of the differential pressure sensor.
2.Suggest that level of small range differential pressure sensor installation.
3.Pay attention to the pressure range and the static pressure value of the differential sensor can meets the corresponding requirements of the measured differential pressure point.
4.It is strictly prohibited to negative pressure higher than positive pressure in the cavity.