| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | |
| Model Number: |
Quick Details
Specifications
UV-CTpP high-sensitive ps plate
Introduction
PHOENEAGLE UV-CTpP ps plate are researched and developed innovatively by Anhui Phoenix Plate Technology Co., Ltd to meet the UV-CTP(CTpP/ CTnP) technical progress. The plate not only can meet the demand of UV-CTP(CTpP /CTnP)plate making but also be applied to traditional and manual plate making technic. Excellent component combination and producing technics make the plate to be provided with high-sensitive, strong compatible, stable quality and so on characteristics.
Special high grade Aluminium.
Using high grade Aluminium as the backstop to keep the even surfance, exact dimension and all kinds of physics and mechanical capabilities.
Compound halftone frame, close-grained oxidation layer.
Making halftone frame on the substrate by a series of mechanically abrading and electrochemistry techniques to form multilayer Compound halftone frame and close-grained oxidation layer on the surface to ensure the plate to keep exact dot-reproduction and excellent endurance.
Hydrophile management to substrate
UV-CTpP/CTnP ps plate adopt Hydrophile managed substrate to not only ensure the firm combination between sensitive layer and substrate but also improve the balance between water and ink so that it prevent from scum when machine idle and during printing.
Excellent coat component
UV-CTpP/CTnP ps plate adopt Excellent coat component to make the plate keep well-proportioned coating apparent, high sensitive speed, fine dot-reproduction,
Wide plate making operation latitude and 100000 pressrun. The plate is very suitable to UV-CTP(CTpP/CTnP) plate making for its high sensitive speed and excellent dot-reproduction so that it is very fit for commercial top grade color printing and
Newpaper printing.
Making small grain on the surface
When used as UV-CTpPplate, no flock coating; when used as traditional positive ps plate, using flock coating to shorten the vacuumizing time so that ensure
The close touch between film and plate and prevent the dot becomes weak.
|
Technical
data
|
sensitization(mj/cm2 )
|
90-110
|
|
Gray Scale cleanness series
|
Third series
|
|
|
Dot reproduction(%)
|
2%-98%
|
|
|
Tiny line reproduction(um)
|
10-6
|
|
|
Pressrun(piece)
|
50000-80000
|
|
|
Recommended
Plate making
conditions
|
Developer dilute
|
PH-P : water=1 : 6(automatic)
PH-P : water =1 : 9(manual)
|
|
Develop conductance(mS/cm. 25℃)
|
47-43(automatic)----38-30(manual)
|
|
|
Develop temperature(℃)
|
21-25
|
|
|
Develop time(S)
|
30-45
|
|
|
clean
|
Repair paste: 30s
|
|
|
Repair liquid: 10s
|
||
|
gum
|
well-proportioned : 20ml/m2
|
|
|
|
|
Store, open, transport.
·light, heat can make coating happen chemic change, so store temperature: 10-30℃, relative humidity: ≤65%.
·open under yellow light; suggest to plate making without sunlight, except printing down light, all other light should be yellow light.
·lightly take up and down, prevent bump, break, throw, stacking height ≤ 1.5 meter.
Storage life
Store according to recommended condition, storage life: 24 months.