Centrifugal Wet Spun pipe Making Machine
1) pipe diameter: 200-2000mm
2) Pipe length: 1000-4000mm
3) Pipe Joint: Flush joint ,Rubber Ring Joint
4) Pipe Standards: European Standards or ASTM


First, This is the earliest technology to make reinforced concrete pipes, it use the centrifugal force produced by high speed rotation of the mould. to make solid of the concrete, during the production, Feed the wet concrete by feeding machine, and please notice to use a long stick long as the mould, to ensure that the concrete is distributing evenly around the mould.

Second, after finish feeding concrete usually will let the mould running at a higher speed for 3-5 mins, when seeing the inner wall looks smooth, then stop the machine. we can use gantry crane to lift up the mould to the curing tank, after steam curing for at least 3-5 hours, the mould can be taken off. then the pipe is done, if find the pipe with some little defect, workers can repair it with some concrete.

At last, the pipes is curing by normal temperature for several hours, they can be used for culverts, drainage, bridge ...and the mould can be used for the next cycle of production.

Centrifugal Wet Spun Cement Pipe making Machine

Brief Introduction:

LWC series Cement pipe machine is the traditional Wet Spun Pipe forming machine, it is the most popular equipment to produce the reinforced and pre-stressed Concrete pipes.

Working Principle:

This machine is designed to utilize the support wheel to hold the pipe mould, and the wheels will be driven to rotate at high speed by the motor, the high speed rotation will produce the centrifugal acceleration, then the concrete will be compressed to in the inner wall mould and become density and solid at the function of the centrifugal force. Exhaust the extra water and air in the concrete, and form the standard quality concrete pipe.

Features:

This machine is easy to operate, safe and convenient, good performance, high rate of final product, Good quality finished pipe as the international Standards. Its capacity is designed to produce inner effective diameter 200-2000mm, length 2-5meter concrete pipes. These pipes are available with pipe end joint: Flat, Tonuge&groove , Spigot&socket.

Use Application Range:

Water Drainage, Storm Water, Sewage pipes, Agricultural Irrigation, Road Culvert, Power Plant Water treatment

Welcome to contact with us for more detail!