New security high-performance PIR infrared motion detector

Model: HW-03D

Technical Parameters

Sensor: Passive IR sensor with low noise

Working voltage: DC6V, (4pcs AAA 1.5V dry batteries)

Static current: <60uA

Alarm current: <20mA

Working Temperature: +5~+45°C

Humidity: ≤95% (no fog)

Transmitting frequency: 315/433+0.5MHZ

Transmitting distance: no obstacle 80M

Detecting distance: 12M max

Detecting angle: Horizontal 110°, Vertical 60°

Coding method: PT2262 or EV1527 optional

Dimension: 112*60*38mm

Installation

l  Detectors should be installed on the wall 1.8-2.5m above the ground (please refer to picture 4).

l  Adjust detecting angle, try to make it face window and keep it vertical with walking direction (please refer to picture 5).

l  Keep it away from heat, air conditioners and air convection areas (or close the door/window when arming).

l  No obstacle or floating object is allowed (such as flower, grass, clothes and curtain that will be easily be waft by wind) in the detecting area.

l  Detectors should be installed firmly without any waving and shaking.

l  Don't install it exposed to direct sunlight.

The above requirements are primary to avoid false alarm and alarm failure, please pay attention when installing.