| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | HD |
| Model Number: | HS-250W |
| Output Power: | 201 - 300W |
| Output Type: | Single |
| Input Voltage: | 220V |
| Output Voltage: | 12V/24V/48V |
| Output Frequency: | 47-63Hz |
| Output Current: |
Quick Details
Specifications
| Model | HS-250-12 | HS-250-15 | HS-250-24 | HS-250-27 | HS-250-48 | |
| output | DC voltage | 12V | 15V | 24V | 27V | 48V |
| Voltage tolerance | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 20A | 16A | 10A | 9A | 5.2A | |
| Current range | 0~20A | 0~16A | 0~10A | 0~9A | 0~5.2A | |
| Rated power | 240W | 240W | 240W | 243W | 249.6W | |
| Ripple&noise | 150mvp-p | 150mvp-p | 200mvp-p | 200mvp-p | 200mvp-p | |
| DCvoltage ADJ.range | ±10% | ±10% | ±10% | ±10% | ±10% | |
| input | Voltage range | 90~132VAC/180~264VAC(selected by switch),255~373VDC | ||||
| frequency | 47~63HZ | |||||
| AC current | 5.5A/115VAC, 2.8A/230VAC | |||||
| efficiency | 83% | 83% | 85% | 85% | 86% | |
| Inrush current | Cold start current18A/115VAC,36A/230VAC | |||||
| Leakage current | < 3.5mA/240VAC | |||||
| protection | overload | Rated output power115%~150% start over load protection | ||||
| protection type:hiccup mode, auto-recovery after fault condition is removed | ||||||
| ----- | ----- | |||||
| ----- | ||||||
| environment | Working temp,humidity | -10°C~+60°C, 20%~90%RH | ||||
| Storage temp,humidity | -20°C~+85°C, 10%~95%RH non-condensing | |||||
| Withstand vibration | 10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes | |||||
| safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | |||||
| Fit standard | Safety standard | Compliance to UL1012 | ||||
| EMC standard | Compliance toEN55022, CLASSA | |||||
| others | Dimension | 199*110*50mm(L*W*H) | ||||
| Weight/packing | 0.85kg/24pcs/21kg/0.043 m3/1.51CUFT | |||||
| note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
|||||

