| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | HiOSO |
| Model Number: | FC830AM FC830AGM |
| SNMP: | 100M 1000M |
Quick Details
Specifications
SNMP Managed Converter
SHAPE\* MERGEFORMAT
Overview
HiOSO SNMP managed converters include 100M FC830AM series and 1000M FC830AGM series. The whole system includes the 3U rack FTC-16M, NMS card M830AC, card type converters and remote converters. It supports SNMP Protocol, web, Telnet, Serial port management and software upgrade. It can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.
The SNMP managed converters can completely be cooperated with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of Broad-Band private network and Fiber Optical citywide LAN.
Character
l Supports SNMP management, Telnet management
l Enable/Disable optical link-loss alarm function
l Four transmission modes are selectable
l Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard
l Comply with IEEE 802.1Q VLAN protocol
l Support Full/Half duplex auto-negotiation
l Support MDI/MDIX auto sense
l Support transmission distance to 120km (Dual-fiber)
l Support over-size packets of up to 1912 Byte
l Support hot-swappable
l The cards work as standalone and rack-based Media Converters
l Single-fiber and dual-fiber devices are available
Technical Data
-
Mechanical Parameters -
Size | 32mm(H)x 165mm(W)x 128mm(D) |
Operating temperature | ﹣10～﹢55℃ |
Storage temperature | ﹣40～﹢70℃ |
Power supply | AC220V / DC﹣48V |
- Optical Parameters -
Multimode Fiber: 62.5/125, 50/125, 100/140μm | |
100M: MM2km orMM5km 1000M: MM220m orMM550m | Output power: -20～﹣18dBm |
Receiving sensitivity: <﹣31dBm | |
Distance: 0～2km or 0～5km | |
Connector: SC(standard) | |
Type: dual-fiber | |
Wavelength: 850nm/1310nm | |
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm | |
25km
| Distance: 0～25km |
Output power:-15～﹣8dBm (dual-fiber),-14～﹣8dBm (single-fiber) | |
Receiving sensitivity: <﹣34dBm(dual-fiber), <﹣33dBm(single-fiber) | |
Connector: SC(standard) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
40km
| Distance: 0～40km |
Output power: -10～﹣5dBm (dual-fiber),-9～﹣5dBm (single-fiber) | |
Receiving sensitivity: < ﹣36dBm(dual-fiber),<-33dBm(single-fiber) | |
Connector: SC(standard) | |
Type: single-fiber / dual-fiber | |
Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
60km | Distance: 0～60km (when less than 15km, use attenuator) |
Output power:﹣5～0dBm(dual-fiber),-6～0dbm(single-fiber) | |
Receiving sensitivity: < ﹣36dBm | |
Connector: SC(standard) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
80km | Distance: 0～80km (when less than 15km, use attenuator) |
Output power:﹣8～-2dBm(dual-fiber),-3～3dbm(single-fiber) | |
Receiving sensitivity: < ﹣36dBm | |
Connector: SC(standard) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm (1490/1550nm)(single-fiber), 1550nm(dual-fiber) | |
100km | Distance: 0～100km (when less than 15km, use attenuator) |
Output power:﹣6～-1dBm | |
Receiving sensitivity: < ﹣38dBm | |
Connector: SC(standard) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm (1490/1550nm)(single-fiber), 1550nm(dual-fiber) | |
120km
| Distance: 0～120km (when less than 15km, use attenuator) |
Output power:﹣5～0dBm | |
Receiving sensitivity: < ﹣38dBm | |
Connector: SC(standard) | |
Type: dual-fiber | |
Wavelength: 1550nm | |
Typical Application
10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX, 100Base-Fx and IEEE 802.3x International Standard etc
p;