TJ3080 series both are the one component thermal conductive glue, applied in the firm tack conjunction between the electronic components and other device materials. It is in speedy consolidation under normal temperature with superior tacky, exceptional electrical isolation, splendid seal and remarkable heat dissipation performance, which also is durable among the temperature from -60 Celsius to 250 Celsius.

MAIN CHARACTERISTICS
-in one component neutral consolidation performance,it is a highly performed elastomer by vucanization,which is through the condensation function with water molecules in air.
-it has superior thermal conductive performance,which swiftly transmit the heat from the heat source as to exceptionally cool down the heat source temperature.
-it has excellent thermal conductive glue performance on most metal and non-metal materials with superior seal-tack&thermal conductive performance for miscellaneous electronic components.
-it satisfies with EU ROHS Directive.

TJ3080
Properties	TJ3080	TEST METHOD
Appearance	white,paste	visual
Tack free time	2-10 min	stopwatch
Hardness	70 shoreA	ASTM D2240
Tensile Strengh	≥1.0	ASTM D412
Elogation	1	ASTM D374
Splice Strength	≥1.5	DSP
Dielectric constant	4.0Hz	ASTM D150
Thermal conductivity	1.2W/m.k	ASTM D5470

APPLICATION
-it is a superior tack splice material for electronic components,semiconutor and electronic devices,which has exceptional performance of the seal,conjunction,electrical isolation,anti-moisture and thermal conductive characteristics.
-it is highly applied in the electronic device,power module and electrical thermal controller for the heat dissipation and conjunction with seal function,which also is used for splice isolation of PTC
-it is in exceptional suitability for higher requirement on thermal conductive materials with the requirement of splice with seal performance.


USING METHOD
Should clean the surface needed to be spliced and sealed before smearing this thermal conductive glue on it for remarkable conjunction(the thickness no exceeding 6mm).This material is in 5-10 minutes for the tack free time and in complete consolidation character after twenty-four hours.After the operating is over,should instantly screw the cap for storing the unused glue in good seal.Pls cut the seal from the nozzle with its size based on the using volume,from where to squeeze the material out by hand-operating flexible pipe or assembled with special glue extrusion machine to handle.


ATTENTIONS
-During process of storing to the glue,there probably appears a little consolidation phenomenon of the orifice.pls reuse it after cleaning the consolidated area without any effects on material performance.
-pls not exceed the thickness of 6mm when squeezing the glue,also be attention of keeping it from eyes.
-attention in cap seal after using with storing in an shady,dry and ventilated circumstance.
-this material is belong to NON-POISON and non-hazardous product,so applicable for shipping as normal chemical products.
-After opening the seal,it has six months for the quality guarantee period.