Pedestrian flap gate turnstile for access control (RS Security )

Brief Introduce  
 flap barrier turnstile is designed for applications where robust and reliable access control is a requirement but space is limited.The turnstile are available with straight or rounded cabinet ends and a variety finish. A durable cabinet construction ensures long life and minimum maintenance.

Flap gate ,access control,security tripod turnstile,turnstile,flap barrier,security barrier,parking system,boom door,flap gate turnstile

These models can be used for both indoor and outdoor application.They can incorporate access control devices such as proximity readers, smart card readers, biometric readers, coin acceptors, etc.
According to different control modules, this series can be divided into Fully-Automatic Type, Semi-Automatic Type, and Manual Type.
Key Features:
 
1. Reliable and durable, low noise and stable operation, adapt to varied situation;
 
2. Standard electrical interface, various card reader acceptal to our wing gate & can be (remote) controlled by computer, single/Double Directional Optional which can be controlled by both ways or single way( can be mechanically set by the buttons on built-in control panel);
3. Gate open automatically when power off to the request of fire protection, and automatically closes when power on;
 
4. The wing gate installed Infrared sensor interfaces, could be expanded to Infrared testing function.
5. Breakdown Self-checking and alarm indication, easy for maintenance and using;
 
6. The wing gate arm will automatically locked until opening signal is received, motor will stop working in case of the wing encounter of obstruct; ;
7. Anti illegal entering alarm: Light and sound alarm is generated when the illegal invasion and the tail followed;
 
8. Automatically reset function: It will automatically lock if the pedestrian hasn't pass through the channel in the pre-set time after the opening. The passing time is adjustable;
 
9. Passage in both directions electronically controlled. The pedestrian retractable barrier is available in Normally Open (N/O) or normally Closed (N/C) mode. In N/O the speed gate provides an always open walkway in rest position and will only close at unauthorized entry or tailgating attempts;
10. Driving Mechanism: The wings are moved by mechanical arms. The arms are rotated by a torque shaft connected to the drive unit. The drive unit is a DC motor working in conjunction with a bi-directional encoder. A microprocessor control system guarantees the precise movement and positioning of the wings;
 
11. Method of Operation: ON receiving a signal from the access control system, or push button, the wings open. If an unauthorized person tries to tailgate or attempts to enter from the opposite direction, the system detects the unauthorized passage and activates the in-built alarm system;
12. Status Lights: 90mm dia. LED display status lights flush mounted within the speed gates lid top face. Upon authorization a Green arrow will illuminate in the direction of passage authorization whilst in the opposite direction a Red Cross symbol will illuminate to indicate the unit is not available for use or is already in use.
 
Technical Parameters:
 
 
1 Mechanism Double
2 Housing 304# Stainless Steel at 1.5mm
3 Size: 1200mm(L)×300mm(W)×1000mm(H)
4 Stardard Width of Passage/Wing   Length 600MM/280MM(standard)
5 Power Supply Input AC110/220V±10%
6 Working Voltage 24V DC
7 Power Consumption During Idle 10W/Mechanism
8 Power Consumption During   Operation 180W/Mechanism
9 Drive Motor Brush DC Motor 180W/24V
10 Motor Speed 1600 turn/minute
11 Starting Time after Power on 0.5 second
12 Opening/Closing Time 0.8(adjust)
13 Automatic Reset Time after Fault 10 second
14 Pass Speed 40 persons/min(open often),   25-30 persons/min(close often)
15 Protection Level: IP54
16 Working Temperature: -30~50 degree centigrade
17 Electro-magnetic drive: 24V DC
18 Polishing: Brushed surface (Standard) /   Polishing surface
19 Weight: About 75KG
20 Mechanical life : Two million
21 Relative Humidity (RH): 5%-90%(without concretion)
22 Interface: RS485
23 Control I/O: ±12V electrical level signal or   DC12V pulse signal of pulse width ≥ 100ms