Pedestrian Access Control Swing Gate Turnstile (RS Security)

Product Name: Swing gate

Model: RS516

Intelligent swing gate turnstile is integrated with mechanism, electric and micro-controller and various kinds of identification technologies. Adopt reliable security protection equipment, alarm equipments, direction indicator and extended friendly LED panel display.
It has Standard input and output interfaces; It is best choice for system integrators. Compatible with Mifare card, 125kHz card, barcode and fingerprint reader and so on.
Specification
Framework: 304 Grade Stainless Steel

Specification: 1600*280*1000(mm)

Weight: 90kg

Arm length: 300-600(mm)

Swing angle: 0-180

Power voltage: AC220 (10%more or less) V, 50(10%more or less) Hz

Drive voltage: 24V

Interface: Standard port-RS485

LED indicating light: One

Card-reading window: Two

Transit speed: 30— 40persons per minute (normal open), 25-30 persons/per minute ( normal close)Run into working state when power on: 3 s

Auto reset time when there is breakdown: 10sNormal life: 3 million times

Communication interface: RS 485, distance <= 1200mInput interface: Relay switch signal, 12V level signal or 12V pulse signal, pulse width>100ms, drive current>10mA

Function:

 Working method can be set by the buttons on the main panel

Anti-pinch, anti-collision. If there is block during return of gate, motor stops working automatically. Reset again after a default delay, the force 2Kg.

Anti-illegal in, anti-intrusion, auto close for reverse direction.

Anti-collision, gate closes when no valid signal is given.

Protection functions for gate, gate open to prevent motor from being damaged if there is outer force collision.

Gates can be synchronous

Auto-reset. If not go through in a preset time, pass right would be cancelled automatically. (1-60s adjustable), default time is 10s.

Reset function by photocells, 4 or 6 pairs.

Anti-pinch function by photocells, 4 pairs

Compatible with Access control system, consumption system, ESD system, E-ticket system and so on.

One way or two way control

Unit can be controlled and administered by remote control

LED lamp indicator