Security swing barrier, swing turnstile, swing gate for access control

Swing turnstile, swing gate, swing barrier, security wing gate, access control, roadway security barrier, security barrier, traffic barrier

Specifications:
NameSwing gateModelRS216
Housing Size330x415x980mmPower supply voltageAC220V± 10V, 50± 10HZ
Net Weight35kgWorking temperature-25° C--+60° C
Gross Weight45kgRelative humidity≤ 90% non-condensing
Drive current≥ 10mADrive motorDC motor 200w 24v
Time for swing open
And closed1-2SControl typeIC/ID/Barcode control
Accepted
Passing time3SCommunication distance≤ 1200m
Time for auto-reset10SSwing angle0-180
Swing width600-900mmMax channel width600-900mm
Communication InterfaceRS485/RS232Working environmentindoor or outdoor
(with a tent over)
Machine center imported Germanic
Technological motorWorking modeone directional or
Bi-directional optional
Housing Material202 or 304 grade stainless steel optionalPassing speed40persons/min(normal open mode)
30persons/min(normal
Closed mode)

Applications:
Swing gate applies for one direction or bi-directional entry and exit passage.
Bus station, yard, tourism entry and exit passage
Community, factory, company attendance, door access management
Special Passage
Bicycle, motorcycle, disabled passage

Description:
1, Problem-self-test and alarm function, user-friendly maintenance and use; With automatic reset function, gate opening, after a specified period of time does not pass, the system will automatically cancel the user's current access permissions;
Auto-reset delay, the standard is turned on automatically reset after 10 seconds
2, Through the main control on the half-built small-press plate, programmable devices running status
3, When valid card read and passenger passed, arm can be delayed to close from 1-10s which can be set on the control panel.
4, One-directional, bi-directional function, One-directional, or bi-directional control personnel access to
5, Auto-reposition function: After card read, passenger not pass within regulated time period, swing gate will cancel this passing right. And the regulated time period for passing can be set by managers.
6, If passenger pass without card read or valid card read, flap barrier will alarm until passenger get back from the flap barrier and then take a valid card to be read for passing.
7, Erosion control features, in the absence of gate opening signal is received, the arm automatically locked
8, Anti-rush function: If there is no open single, arm will be holding tightly.
9, Adjustable arm swing synchronized (for the double pendulum case)
10, Adjustable normally open or closed, in order to meet the requirements of the different venues
11, Connecting with a variety of reading devices can be linked to the work of receiving the signal relay switch
12, Swing gate is with 485 interface for long-distance control concern and the integration of various readers and writers.
Managing computer directly through the remote control and management
13, Auto power-off arm laid them out, power-on self-closing, meet fire safety requirements
14, Double anti-clipping function: Photocell anti-clipping and mechanical anti-clipping.
When passenger is going through the swing barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatically or stop working for a while with very slight force. Also it will alarm.
15, Direction display to guide passenger which direction is to go.
16, Card-reading with memory or without memory function.
17, Swing barrier can control the population inside in the control of software.
18, Stable running with little noise.