Remote Control for Optional, plus 3USD.
First, the multi-functional smart way wireless remote control switch, a relay output switch signal, device, or motor can be controlled to meet the requirements switch or pass, off switching and control a variety of special programs.
The wireless receiver controller, a high-security, stable performance, low power consumption features, and easy to use. If you learn good remote control is lost during use, just choose the same type of remote control to cancel the re-learning the original remote control and obtain the right to use now. Its output, respectively, three self-locking, jog, interlock.

Second, the output (Special note: Switch off the power before working methods need to be working properly)
A, non-signal lock - the circuit board opposite JP1, JP2 solder shorting
B, the signal from the lock - the circuit board opposite JP2, JP3 solder shorting
C, signal interlock - vacant spot opposite the board, not less then

Third, learning methods
After pressing the learn button, the red light flashes to indicate access to the learning state, press any key on the remote control transmitter signal, the indicator flashes twice to a lamp that success in learning.
Tip: 
* This controller allows up to eight different coding learning remote control, learning first nine after the first failure, and so on 
* 2262/2264/2260/527 the controller with fixed code, learning 1527/2240, such as the use of the remote control, vibration resistance is not limited, but 4.7M/220K best.

Fourth, the technical parameters
1, the working voltage: AC220V
2, Working current: ≤ 6mA
3, Working temperature: -40 C - +80 C
4, the receiving frequency: 315MHz
5, the receiver sensitivity:-105Db
6, the output current: ≤ 10A
7, Size: 31 * 54 * 18m
8,5 = FireWire, 4 = neutral, 1 and 4 outputs, 4 and 5 inputs, 3 and 5 FireWire short