world clock:

1, Time Mode

2, Daily alarm and snooze mode

3, Countdown timer mode

4, Temperature mode

5, Hourly chime mode

6, World City switch

7, World time clock automatically change

Function

1, Time Mode:

Normal time mode display Local time & World city time, date, week, temperature and realize 12/24 hours switch.

2, Daily alarm and snooze mode:

The alarm clock can be set into daily alarm with music available. The snooze function can be turned on at the meantime.

3, Countdown timer mode

It can be timed counter-clockwise (range from 23:59:59 to 0:00 00) and with the ring reminding when the time arrives.

4, Temperature mode:

Auto-detecting atmosphere temperature. At normal mode, press DOWN/C/F, it can realize Centigrade and Fahrenheit switchable.

5, Hourly chime mode:

Two ways of Hourly chime function to be selectable.

Basic operation:

l       Pull out the insolated sheet to enter into normal display mode.

l       At normal mode, when the alarm icon"  " is on, press MODE turn on or turn off the snooze icon" " .

l       At normal mode, press DOWN/C/F to realize the Centigrade and Fahrenheit switchable.

l       At 12/24 Hr mode, press UP/12-24 to switch the mode from 12 Hr to 24 Hr.

l       At alarm mode, there will be " " icon on the display, press SET along with UP/12-24, DOWN/C/F to set the alarm time and alarm music. There are different sound available. Press it again to turn off the alarm mode. When the alarm time arrives, it will ring for 1 minute. If the snooze function is on at the time, it will ring every other N minutes, and 3 times in all.

l       At countdown timer mode, press SET to set the time counter-clockwise (range from 23:59 to 00:00). When the time arrives to 0:00 00, it will remind with 1 minute ring, 0:00 00 will be constantly flashing at the same time.

At any of the above mode, if without any pressing for 1 minute, it will go back to the normal mode automatically.

1, Normal time mode.

   When on, its display can be 24 world cities and their time. Alphabetize to switch the world city with its time and broadcast city name. Normal time display should be 12:00. The World City is LON. When switching world cities and their time, the local time will not be changed.

l       Time setting.

l       At normal mode, press SET to start setting, the setting sequence should be:

hour—minute—year—month—date, Press UP/12-24,DOWN/C/F to adjust. After setting the local time, the world city time will renew.

l       Setting range: year: 2000-2069; month: 1-12; date: 1-31; hour: 1-12; minute: 0-59.

l       When the date is setting, week will automatically move from MON to SUN spontaneously.

l       At setting mode, if without 1 minute pressing any key, it will exit the setting automatically but with the current setting time and date.  

l       World City switch.

At normal mode, Press UP/12-24 to realize the switch between world cities, alphabetize to switch the world city and broadcast the city name with its time.

l       12/24 mode switch

At normal mode, press UP/12-24 for 2 seconds to enter into 12/24 switchable mode.

2, Alarm clock and snooze function

   At normal mode, press MODE to enter into the alarm mode.

l       Alarm setting.

At alarm mode, press SET to set the alarm, the setting sequence should be: hour-- minute --snooze, press UP12-24, DOWN/C/F to adjust.

Put " DIDIDI" as alarm sound, the volume is from low to middle, finally to biggest. The total time is 1 minute. After that, it starts to tell the time.

Put the voice of Cock or CUCKOO as alarm sound. The total time is 1 minute. After that, it starts to tell the time. The time interval of SNOOZE can be freely adjusted (Minute Range: 1-59), 2 times at most. When alarm clock rings, press any key to stop it and activate snooze function. Then, press any key again to stop snooze.

3, Hourly chime mode

At normal mode, press MODE to enter into the hourly chime mode. At the meantime, press UP/12-24 to realize two ways of Hourly chime function switchable.

Two ways of Hourly chime function: 1) CHM1 tell the time for every o'clock in a day. 2) CHM2 tell the time from 7am to 9pm.

4, Countdown timer mode

At normal mode, press TIMER to enter into the countdown timer mode.

* Countdown timer setting

At the countdown timer mode, press SET to enter into the setting status. The setting sequence should be:    hour--minute, Press UP/12-24, DOWN/C/F to adjust.

* Setting range: hour: 0-23; minute: 0-59.

* Countdown time begin when the second displaying on the position of change from 00-59, it will begins to countdown clockwise, same as the minute and the hour.

* When the countdown time arrives to 0:00 00, it will ring for 1 minute to remind, if it is at timer mode, 0:00 00 will be constantly flashing at the time of ring.

At setting mode, if without 1 minute pressing any key, it exits the setting mode, and begins to countdown time.

5, Temperature mode

With the current temperature display, at normal mode, press DOWN/C/F for 2 seconds to switch Centigrade to Fahrenheit mode.

6, Independent TALK button

Shortly press TALK to tell the time and temperature; Long press DOWN/C/F for 2 seconds to tell the date and week.