| Warranty: | 2Years |
|---|---|
| Model Number: | W-210BP |
| Brand Name: | CVR |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
W-210B&W-210BP is a line array system which is made of two 10"neodymium woofers, one 3"titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required.
| Model | W-210B & W-210BP(Active) |
| Type | Line array system |
| Frequency Response | 60Hz-20KHz±3dB |
| Power handling | LF 700W(RMS)1400W(PEAK) |
| HF 100W(RMS)200W(PEAK) | |
| Power amp | 900W/8ohm (W-210BP) |
| Amplifier type | Switching power amp, class D circuit |
| Other functions | Built-in crossover(W-210BP) |
| Sensitivity | LF 101dB(1W-1M) |
| HF 109dB(1W-1M) | |
| Max-S.P.L | LF 127dB(PEAK/1M) |
| HF 129dB(PEAK/1M) | |
| LF section | 2×10"(260mm) neodymium woofer |
| 75mm(3in)coil | |
| Nominal impedance | 8 ohm |
| HF section | 1×3" neodymium compression driver |
| with 75mm titanium diaphragm | |
| Nominal impedance | 8 ohm |
| Output section | 2-channel |
| Dispersion pattern | 110°H×10°V |
| Finish | Water-proof,wear-resistant textured |
| black paint | |
| Array design | Arrays of less than 3×W-210B will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
| Rigging system | Please refer to the W-210B user's |
| manual before any operation | |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | LF 70Hz-2KHz |
| HF 2KHz-20KHz | |
| Dimensions | 737 x 288 x 415mm(W x H x D) |
| Package dimensions | 810 x 360 x 480mm/0.14cbm |
| Enclosure | Birch plywood |
| Net weight | 31kg (W-210B) 34kg(W-210BP) |
| Gross weight |
31kg (W-210B)35kg (W-210BP) |