DC/DC Power Supplies Description:
High power density
no heat sink required
wide input voltage
PCB mounting
DIP packing
Industrial standard pin-out
High isolation voltage
CE,UL certificated
Key Specifications/Special Features:
Input Voltage:12V
Input Voltage Range:10 to 14V
Output Current: 16A
Industry-standard footprint and pinout
Synchronous Buck Converter Topology
No minimum load required
Programmable output voltage via external resistor
Setpoint Accuracy:±2% (Max)
Trim Range:0.75V to 3.63V (Full Resistive Load)
Remote Sense Compensation:0.5V (Max)
Line Regulation:±0.5 % (Full Resistive Load)
Load Regulation:±0.5 % (From no Load to Load)
Turn-On Delay Time:2mS (Full Resistive Load)
Rise Time:1.5 mS (From 0.1* Vo to 0.9* Vo)
Load Transient Voltage:160mV
Setting Time:50μS (Vout＜10% Peak Deviation)
Ripple and Noise:50mVp-p (20MHz Bandwidth)
Maximum Capacitive Load:5000μF (Min ESR＞10mΩ)
Switching Frequency:300KHz
Efficiency:97%
MTBF: 5×10⁶h (Bellcore TR332, 25℃)
Operating Temperature:-40℃ to +85℃
Storage Temperature:-55℃ to +125℃
Relative Humidity10% to 90%
Remote Control
over-current,over-temperature,Short-Circuit Protection
Sizes: 20 (W) x 6.2(L) x 3mm (H)