High Pressure Flat Gate Valve 150LB
1. Size: DN50-400
2. Pressure: 1.0Mpa-1.6MPa
3. Flat Gate Valve
4. High Pressure Valve

Flat Gate Valve, Lug/Wafer 150LB/300LB Knife Gate Valve Stainless Steel Manual Operated PN10/PN16 Gate Valve  Manufacture

Nominal Diameter	4"-160" ( DN100-DN4000 )
Pressure Grade	0.05 Mpa or according to the customers'demands
Valve Body Material	Cast iron, cast steel, cast stainless steel
Temperature Range	-15~350 °C/ Degrees Celsius
Suitable Medium	Large-scale tunnels of metallurgy, building material ,power, petrifaction and light industry
Power Supply Voltage	220V, 380V or according to the customer's demands
Input Signal	Switching valve 4-20mA Feedback 4-20mA
Control Accuracy	1%, 2.5%
Turning Angle	0-90°

Specifications of high pressure flat gate valve, stainless steel solid wedge gate valve, 150LB/300LB Stainless Steel Knife gate valve,  handwheel operated knife gate valve:

1). Pressure: 0.6-1.6 MP , 150Lb, 125LB

2). Size: 50-1800mm,  NPS: 2''TO 72'' inch

3). Body, Bonnet, material: Carbon Steel (WCB), Stainless Steel (SS304, SS316, SS301, 316L), Cast Iron

4). Seal: Rubber, PTFE, Stainless steel, Hard Alloy

5). Working temperature: Rubber <100'C, Hard-seal< 425'C

6). Suitable Media: Paper pulp, Dirty Water, Coal Slurry, Ashes, etc/

Our electric knife gate valves are widely used in paper making factory, Coal Washing plants, Sewage treatment plants, slag-off industry, Chemical industry etc.

Specifications:

Non Rising Stem Gate Valve, Stainless Steel Wafer/Lug PN20/PN16 Knife Gate Valve

1.  Size: DN50-DN400
2.  Pressure: 1.0Mpa-1.6MPa
3   Material:  Cast Iron, Stainless steel 304, 316, 316L

4.  Material for Disc:  2Cr13, 201, 304, 316, 316L

5.  Seat Ring:  PTFE, 2Cr13, stainless steel, hard alloy

6.  Packing:  Graphite, PTFE

7.  Connection:  Wafer, Flange, Plum

8.  Application:  sewage, powder, paper pulp, ore pulp, sugar