| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | LEED INK |
| Model Number: | DT1201 |
| Application 1: | Membrane Switches |
| Application 2: | Printed Antennas |
| Application 3: | Heating Element |
| Application 4: | Flexible Circuits |
| Application 5: | RFI Shielding |
| Application 6: | Piezoelectric ceramics |
| Application 7: | Membrane Keyboards |
Quick Details
Specifications
Silver Ink for Membrane Keyboards and Flexible Printed Circuits
(DT1201)
Description
DT1201 is a low temperature conductive silver for screen printing, specially designed for the keyboard circuit, membrane switches, printing resistance& electric heating element, etc. It can be printed on substrate of PC, PET, PVC and PU film with good adhesion, low resistivity, and high theoretical coverage. This product has features of low heat-drying temperature, short-drying time, low resistivity, good adhesion, superior abrasion resistance and flexibility.
Typical Application
Membrane Switches Printed Antennas Heating Element
Flexible Circuits RFI Shielding Piezoelectric ceramics
Typical Properties
|
Silver Ink For Membrane Keyboards and Flexible Printed Circuits |
|
|
Viscosity |
5~30Pa?S (10rpm, 25℃, 2min) |
|
Solids Content by Weight |
60±5% |
|
Screen |
Stainless steel screen: 165~325mesh / Polyester screen: 160~300mesh |
|
Recommended drying T/t |
130℃/30min, or150℃/10min |
|
Theoretical Coverage |
100-200 cm2/g(depends on the thickness of membrane ) |
|
Sheet Resistance |
＜0.06 Ω/□(thickness of membrane: 6μm) |
|
Adhesion |
3M600 adhesive tape×1min, pull vertical, no exfoliation |
|
Pencil Hardness |
≥2H |
|
Flexibility |
△R <2Ω (width1mm, 2kg×180°, bend×1min×10times) |
|
Maximum service temperature |
＜70℃ |
|
Shelf life |
6months under original seal, 5～25℃ |