1. Pecifications1.40 meters(130ft) waterproof.
2. Excellent waterproof function.
3. O-ring waterproof.
4. Easy handle and elegent design.

Highlights:

Main material: PC, Clear plate glass, EPDM rubber, O-ring, etc.

Waterproofing: Waterproof seal.

Certificates: CES and IPx8.

Specification:

Best Use: All

Color: Black

Maximum depth: 40 meters, (130ft)

Net Weight: 400g

Dimension: 150mm(L) * 110mm(w) * 115mm(H)

Camera operating temperature: 0-40°C(32-104 F)

Testing the waterproof case:

Before use, it is important to make sure the waterproof case is functioning correctly and does not leak. Hold the waterproof case in a tub filled with fresh water for 5 to 10 seconds. Remove the waterproof case and then hold it underwater again or 30 seconds to 1 minute. Finally, remove the waterproof case and hold it underwater again for 3 to 5 minutes, pressing the buttons and moving the zoom lever to ensure not leak.

Cleaning the waterproof case:

Make sure clean the waterproof case and waterproof seal as soon as possible after you used.

1. > Close the waterproof case

Make sure the catch is securely closed.

2> Wash the exterior of the waterproof case in fresh water.

-Put the waterproof case in tub of fresh water(for example, the water temperature should be within 0-40°C(32-104 F).

-Clean the waterproof case by moving it back and forth up, down, left and right at least 10 times.

-Press the buttons, operate the zoon lever, and remove any debris (e. g. Hair, sand or dirty) on the exterior.

-If the waterproof case was used in salt water, let it soak in fresh water for several hours to remove salt deposits. If salt deposits remain on the waterproof case. Metallic parts may rust or button may become harder to press.

-Remove the waterproof case from the water. Make sure no debris remains on the exterior.

-Wipe the interior and exterior of the waterproof case with a soft, dry cloth.

Let the waterproof case dry in a shaded place.

Storing the waterproof case:

-Keep the waterproof case open when storing it, this will prevent the waterproof seal from deforming, thus insure that the waterproof case remains waterproof.

-Do not store the waterproof seal in a place in which it can accumulate dust or become scratched.

-If you do not plan to use the waterproof case for over a month, remove the waterproof seal.

-If using the waterproof seal after it has been is storage, make sure is storage, make sure that it is not deformed, cracked or otherwise damaged, if it is damaged, do not use it under any circumstance.