Abrasive Grain Sizes: | 0.2-2.5mm |
---|---|
Usage: | sand blasting |
Material: | steel |
Brand Name: | Yida |
color: | blue |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
1000mts/month
- 25kg/bag
- Purpose: shot peening, abrasive medias to remove dust from steel surface
- Top quality and reasonable rates
- Immediately delivery available
- Customized production available.
INTRODUCTION:
Operative Standards:
in accordance with standards of GB/T18838.32008 Steel Shot and Steel Grit,SFSA20-66Cast Steel Abrasive, SAE J827 Cast Steel Shot, SAE J1993High Carbon Steel Grit, YB/T5149-1993 Cast Steel Shot, YB/T5150-1993Cast Steel Grit,ISO11124-3High Carbon Cast Steel Shot and Grit.
the Major Technological Index:
Products |
Steel Grit | |
Chemical Composition |
C |
0.701.20% |
Mn |
0.351.20% | |
Si |
0.401.20% | |
S |
0.05% | |
P |
0.05% | |
Microhardness |
GP:4250HRC (399509HV) | |
Hardness Deviation |
Max Deviation 3.0HRC | |
Microstructure |
Tempered Martensite or Sorbite | |
Density |
7.4g/cm3 |
Application:
Blast cleaning of cast steel grit:Used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, H type steel, steel structure.
Rust removal of cast steel grit:Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of?Forging.
Shot blasting of cast steel grit:Shot blasting of profile steel, ship board, steel board, steel material.
Shot blasting of cast steel:Shot blasting of steel board, profile steel, steel structure.
Pre-treatment of cast steel grit:Pre-treatment of surface, steel board, profile steel, steel structure, before-painting.
Steel Grit Types:
GP:Angular when new, this grit rapidly rounds off in use and its particularly suited descaling applications.
GL:Although harder then GP steel grit, also loses its sharp edges during shto basting and is particularly suited to descaling and surface preparation applications.
GH:Having maximum hardness, GH always remains angular in its operating mix. these abrasive are particularly effective in surface treatment processes and produce a uniform, etched finish, GH angular grit should only be used in wheel machines where working requirements take precedence over cost price considerations (for example with rolling mill cylinders or when a special finish is needed). For use mainly with compressed air equipment.