Place of Origin: | China (Mainland) |
---|---|
Brand Name: | CBY |
Model Number: | CBY-A-ZA120W |
Power: | 120w |
Name: | LED aquarium light |
Quick Details
Specifications
Specification |
|||
Name |
120W LED Aquarium Light |
Actual power |
125~150W |
Model |
CBY-A-ZA120W-B |
LED Qty |
48pcs*3W |
Input voltage |
AC100~240V |
LED color |
White(12000k)/Blue(460nm) |
Output voltage |
DC70~90V |
Lifespan |
50,000 Hours |
Input current |
690mA |
Brightness value |
0%~100% |
Low voltage impulse |
400us |
PF |
0.9 |
Control system |
RTPM |
Working frequency |
50~60Hz |
Circuits |
2 |
Working environment |
-20~40℃, 45%~95%RH |
Product size |
288*280*75mm |
N.W. |
3.8kg |
Inner carton size |
346*346*150mm |
G.W.(Inner carton ) |
4.5kg |
Outer carton size |
612*358*362mm/4pcs |
G.W.(Outer carton ) |
19kg |
Standard configuration |
LED Light x1,Remote control x1,Power line x1,Chaining x2,Remote control operating instruction x1 |
||
Remarks |
The above parameter is based on White:Blue=1:1, for reference only |
Illumination and PAR value data sheet |
||||||
Height(cm) |
20 |
40 |
60 |
80 |
100 |
120 |
PAR (umol m-2s-l) |
2200 |
720 |
325 |
180 |
113 |
75 |
Irradiation Area(㎡) |
0.2 |
0.45 |
0.8 |
1.35 |
2 |
2.8 |
(Remarks: the irradiation area is base on PAR value>10 )
Unique innovative ideas:
I. Double cages structural heat dissipation design,better cooling performance
The double cages structural design change the heat dissipation mode of the traditional LED Aquarium Light, divide the inside of the lamp to tow parts, and form two heat-dissipation cages, cut off the internal thermal cycle effectively and reach the best cooling performance.
Use the unique air-out design and open air exhaust in the two sides of the lamp, remove the high temperature air rapidly, ensure the light body operation in a low-temperature environment.
II. Prevent drippage water design
The lid of the light is with sloping ends and 5°angled holes to prevent the light from the damaging of drippage and dust.
III. High quality 3W LED+700mAcurrent=The top performance
700 mA is the best drive current for 3W LEDs,runing LEDs with possibly high current can take full advantage of LEDs, making your initial investment in LED devices to be well worth it.However, LEDs and LED drivers should be of superior quality as so to undertake the high electric current, besides the entire equipment should be good enough in heat dissipating to bear all the heat emitted by 3w leds.Selects the finest LEDs and drivers to ensure the stable performance as well as the long life span of the fixtures,our three-year warranty policy proves our confidence in products.
IV. Modularity design
Modularity design, each part interconnect by the male female plug directly, very easy for repairment and maintenance, only few steps to assemble up the whole fixture.
V. RTPM intelligent control system(Remote,Dimming,Timing and Temperature control)
RTPM is a multifunction intelligent system, including remote, dimming, timing, custom temperature control and mult-unit chaining function. In order to meet the growth demand of all kinds plants, the users can choose various different lighting effect scheme.
1, Remote-controlled, dimming and timing
There are three controllable circuits in the light, the brightness value is 0%-100%, in order to add and reduce the adjustable brightness , 1% or 10% is available, also, 1% is allowed to adjust the brightness in the single circuit. Four time bucket can be set on brightness in each circuit. In the right system time setting circumatances, when the time reach timing time bucket, the hole light will turn into the timing preinstall brightness automatic., 24 hours continuous cycle.(Please see the remote operation instruction manual )
2, Temperature control and protection
When the heat sink temperature over 65℃, the intelligent temperature control will cut off the power supply system automatic. The system will outo star when the temperature cooling to 50°.
3, Data memory
The brightness and timing setting will auto-save after setting 45 seconds, the lamp will enter the setting brightness condition last time when it electrify and get to work next time. The system time will keep the clock continuous operation about 3 months after the lamp completely without electricity, the built-in superbattery will be full charged within 20 seconds. Also, it without needing battery replacements.