(Remarks: the irradiation area is base on PAR value＞10 )

Characteristics:

1. Changed mesh vents to hollow out, increase the air displacement and the cooling capacity per unit time, more convenient forcarrying.

2. Using built-inquiet fans, and use the shutter in the wind, induced draftfrom all sides, very low noise, waterproof and dustproof, waterproof grade can reach IP32.

3. Special structure make the heat dissipation effect very good, the temperature of the LEDs' feet dropped below 50°, lowestbad loss rate of the lamp bead.

4. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damaging the lamp body.

Introduction:

1. Use high quality LED lighting source, the lifespan is up to 50000 hours.

2. Replace 3~5 times of the HPSL power, 80% electric energy saving than the tradition HPSL and MHL.

3. High lighting effect, 90% of the light will be absorbed by the aquatic plant, but to the traditional HPSL and MHL, the lighting effect is just 8%~10%.  

4. Input cooling system, well solve the heat sink problem.

5. The input voltage is AC100V~240V, suitable for the world standard. Built-in power supply. No need other equipment, just access AC100~240V voltage from the plug, the lamp will be working smoothly, don't need the reflector and ballast either.

6. The lighting area and the height are changeable according to different plants and environments, the same as the parameter .

              7. Environment-friendly, no mercury and other harmful heavy metal.

              8. Customers can choose different ratios, Our suggestion is white: blue=2:1 or 1:2, the common temperature of the white is 12000~14000K or 6500K, the wavelength of the blue is 460-470nm. The mixed light of red, blue, orange, yellow, UV, IR and white provide the hydrophyte needed light spectrum.The white LED colour temperature for the fresh water tank is 6500K, 12000-14000K for the salty water, the blue light are good for the growth of hydrophyte, customers also can choose the more suitable wavelength and LED colors.

Application:

Ideal for all the aquatic organisms, use the blue lights at night, can appear the fluorescence colour of the corals and the software fish, more gorgeous and bright-coloured, stronger penetration and the best ornamental effects.

Attention:  

1. In order to save energy, please turn off the power if not use the lamp in a long time.

2. Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture.

3. The working environment for the light is -20~40℃,45%RH~90%RH.

4. To protect the light, Pls cut off the power when there is a lightning strike.  

5. Don't touch or move when the light working.

6. The above parameters are according to the conventional ratio(White:blue=1:2), customers can choose different ratio according to different require.