Special Configuration

1. Two 3.5KW Air-cooling spindle, One 4.5KW Air-cooling spindle.

 Asynchronous multi-head woodworking machine is customized for changing the tools within 2-4 piece. It's not only economic, but also can realize the prompt auto tool change, save the time of manual tool change, improve the working speed and the precision.

2. The Middle spindle can Rotate 180 degree freely according to your process, not only can used be for engraving and cutting on plane board's surface , also for milling and drilling on the board's two sides.

3. Three spindles can use three different tools for your three different designs' processing at the same time, which is similar with Auto-tool changer CNC Machine Center with three tools.

4. Taiwan Syntec Control System, with vernier Handle controller.
5. Vacuum System with vacuum table with suction block, vacuum pump and tubes.

6. Higher gantry can be up to 300mm;  Bigger gantry width can make sure every spindle's effective working area.

7. Heavy bistratal Side plates, which can keep large supporting power for the gantry's moving perfectly.

8.  XYZ effective working area is 1300*2500*300mm.

9. Independently Electric Control Box, with perfect wiring and free moving pulleys.

10. Heavy Hard Steel Lath Body, keep the machine's working High stability.Whole machine is welded with seamless steel structure, dealing with Time-treatment,  the stability is excellent, never to be deformed.

11.  High-precision and bigger ball screw.  Original Bigger Taiwan HIWIN Straight Square Guide Rail. To make sure the machine's working high-speed and high-efficiency.

Technical Parameter: