1.CNC control

2.make various shape

3. function:straightening,bending and cut

Introduction:

Straightening system characteristic:automaticCNC bending hoop machineis controlled by the PLC numerical control system,formed by horizontal and vertical adjustable straightening wheel ,which combine with 4 traction wheel to ensure the best straightening precision.

CNC bending hoop machine contain reducer,big gear wheel,pinion,curve disk.Twin-stage braking motor directly connection with the reducer acting as stair speed cut.pinion cooperate with big gear wheel acting as second level speed cut.Big gear wheel always drive rotation of curve disk.Curve disk is installed centre axle hole and numbers of curve axle hole.

Operation instruction and notice:

1.Please check the mechanical capacity,ensure the workbench and curve drilling crew keep level,prepare various dabber tool.

2.According to the diameter of steel and requirement of  bending hoop machine,install the dabber,molding axle,buting iron axle or changeable shelf,diameter of dabber should be 2.5 times for steel′s diameter.

3.Check and ensure the mandrel ,baffle plate and turn plate should be free from damage and crack,protective cover should be tight. After confirmation by the normal operation for the idle machine,then it can work .

4.When the machine work,please insert the side that need bend into spare gap in the turnplate,fasten and impact the other side by hand.

5.Don′t change the dabber,change the angle ,adjust the speed,add the oil and clean at the operation of the machine.

6.Don′t process the diameter,numberof the steel and rotate speed of the machine exceed the rules of the machine.

7.When bending the high hardness or low content alloy rebar,you should change the max diameter and dabber on the basis of the machine′s nameplate rules.

8.Don′t standing in the rebar′s operation radius and on the side of the machine that is not fixed.

9.When the turnplate reversing,you can operate after the stop and stabilization of the machine.

10.After finishing the operation,you should clean the site,matain the machine ,cut off the power and lock box.

Specification 

HH4-12 single line cnc bending hoop machine:

Diameter of rebar	4-12mm	Hooping length	100-1000mm
Angle of bending	0-180°	Accuracy of length	±1mm
Precision of Angle	0.1°	Rated power	13.5kw
Weight	1300kg	Demension	2600 *680*1560mm

HH4-10 double line cnc bending hoop machine:

Diameter of rebar	5-10mm	Hooping length	100-1000mm
Angle of bending	0-180°	Accuracy of length	±1mm
Precision of Angle	0.1°	Rated power	11.5kw
Weight	1200kg	Demension	2600 *680*1560mm