| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | MSJ |
| Model Number: | |
| Material: | Fiberglass |
| Application: | Low Voltage |
| Rated Voltage: |
Quick Details
Specifications
Armoured with ';industrial and armored winding belt, armor, belt with armor, is a high-tech product, its is made special glass fiber woven into the basketwork of high strength, and then at the surface coating water belt curing polymers made a glass fiber products.
Characteristics
Easy to use, easy to carry, started almost no tension, rapid water cure or in the air also can slow natural curing, odourless, non-toxic and difficult to burn, durable, water resistant and most chemical solvents and fuel, mechanical wear resistance, corrosion resistance, high insulation, any model form and so on.
Scope of application
The power cable, communication cable joint armoured protection, power cable sheath of repair, communication cable or the charging cable inflatable jacket damaged the pipeline and repair, special environment support structure maintenance and protection occasion, corrosion resistant, high temperature of use ideal material.
How to use
1.if used to prevent leakage repair, first with traditional plugging materials will be leakage place sealing, used for other use when the steps to spare. Clean the surface of things by winding.
2.put on gloves, open the bag, take out directly into the water bags, knead crowded out a few seconds after tape, squeeze out the extra water in the tape.
3.will armoured with spiral wound in regular area, each layer on layer a third of overlap, and with a hard, general winding 4 ~ 8 layer, layer number of specific according to different application is different. After the tie up repeatedly touch extrusion surface model form, to increase between each layer of adhesion strength.
Attention
1.before the use wear gloves.
2.if the environment temperature is below 0, ℃, to achieve the effect and curing speed, please will armoured with preheat to 2 ℃ above.
3.the temperature of the water 25 degrees or so, no more than 50 ℃.
4.the armoured with which is open, each open a bag of (not to open multiple bags), and within the prescribed time after operation.
5.curing time and the water temperature and environmental temperature related, curing time reference as follows:
2 ℃ / 36℉ 25 ℃ / 77 ℉ 50 ℃ / 122 ℉
15 minutes 8 minutes 4 minutes
6.avoid deliberately kneading bags, prevent bags damaged.
Storage: in the cool dark dry place save, indoor storage temperature 10 ℃ ~ 30 ℃.
Validity: within three years from production.
Characteristics
Easy to use, easy to carry, started almost no tension, rapid water cure or in the air also can slow natural curing, odourless, non-toxic and difficult to burn, durable, water resistant and most chemical solvents and fuel, mechanical wear resistance, corrosion resistance, high insulation, any model form and so on.
Scope of application
The power cable, communication cable joint armoured protection, power cable sheath of repair, communication cable or the charging cable inflatable jacket damaged the pipeline and repair, special environment support structure maintenance and protection occasion, corrosion resistant, high temperature of use ideal material.
How to use
1.if used to prevent leakage repair, first with traditional plugging materials will be leakage place sealing, used for other use when the steps to spare. Clean the surface of things by winding.
2.put on gloves, open the bag, take out directly into the water bags, knead crowded out a few seconds after tape, squeeze out the extra water in the tape.
3.will armoured with spiral wound in regular area, each layer on layer a third of overlap, and with a hard, general winding 4 ~ 8 layer, layer number of specific according to different application is different. After the tie up repeatedly touch extrusion surface model form, to increase between each layer of adhesion strength.
Attention
1.before the use wear gloves.
2.if the environment temperature is below 0, ℃, to achieve the effect and curing speed, please will armoured with preheat to 2 ℃ above.
3.the temperature of the water 25 degrees or so, no more than 50 ℃.
4.the armoured with which is open, each open a bag of (not to open multiple bags), and within the prescribed time after operation.
5.curing time and the water temperature and environmental temperature related, curing time reference as follows:
2 ℃ / 36℉ 25 ℃ / 77 ℉ 50 ℃ / 122 ℉
15 minutes 8 minutes 4 minutes
6.avoid deliberately kneading bags, prevent bags damaged.
Storage: in the cool dark dry place save, indoor storage temperature 10 ℃ ~ 30 ℃.
Validity: within three years from production.