Cartridge filter dust collector

Located in Qingdao, Sandry Machinery Co., Ltd. is a professional manufacturer in casting molding machinery with 7 years.Our dust removal equipment are Shaking type baghouse filter and Cartridge filter.

cartridge filter parameters:

Type	Tube Qty	Filtering area m2	Wind capacity treatmet m3/h	Weight KG
HR2-8	8	120	6000	800
HR3-12	12	180	9000	970
HR4-16	16	240	12000	1060
HR3-24	24	360	18000	1683
HR4-32	32	480	24000	1980
HR4-48	48	720	36000	2762
HR4-64	64	960	48000	3238
HR4-80	80	1200	60000	3745

 

What is cartridge dust collector?

 It is one kind of dust-removal equipment which is made up of several cartridge filters and adopts pulse back flushing. According to the way of installation of the cartridge filter, it has four types. They are sideways installed cartridge filter dust collector, endways installed cartridge filter dust collector, ceiling mounted cartridge filter dust collector and top mounted cartridge filter dust collector.

 

Product Pictures:

 

 

Working Principle:

1.These air valves deliver momentary burst or pulse of high compressed air through the manifold pipe into the filter tube. This push of air creates reverse flow of air, which expands these filter cartridges to remove the collector dust.

2.The cleaning procedure occurs on a row by row basis ,therefore only a fraction of cartridges are interrupted for cleaning which makes sure of continuous ventilation.

3.The dust cake when pulsed from the filter cartridges falls directly into the bucket at the bottom where it is removed.

4.An exhaust fan is suitable for air volume 1000 cubic feet per minute and is mounted on the top of dust collector, which generates the negative draft throughout the process

Main Features:
1.The complete installation is designed to occupy a minimum amount of floor space and overhead room.
2.It can be assembled on site without any requirement of the expertise manpower.

3.The units are fully welded construction. It has no moving part, which guarantees a long life.

 

  

Our service

1.Eight experienced engineers to consider every possibility for customers.some of them have over 10 years knowledge of casting technology.

2. 3D software for auxiliary design will show every design detail in front of you.

3.Experienced technicians for production installation ,commissioning&service.

4.All machine parts are out sourced from professional CNC machining company with strict quality control procedure.