| Condition: | New |
|---|---|
| Place of Origin: | China (Mainland) |
| Brand Name: | Baohao |
| Model Number: | F1600 |
| Voltage: | |
| Power(W): | |
| Weight: | 46 |
| Dimension(L*W*H): | |
| Certification: | ISO |
| Warranty: | |
| After-sales Service Provided: |
Quick Details
Specifications
Mud pump zirconia ceramic liners
1.Material: Ceramic Liner with steel sleeve
2.Type: Mud Pump Liner
3.Dia: 3" to 9"
4.Model: F800-1000, F1300-1600, LEWCO1300-5.
5.wear-proof,corrosion resistant
Ceramic liners are important spare parts in a mud pump in oil fields, which is the most important equipment in drilling system.
Zirconia Liner
We offers lifetime cost savings, significantly longer service, better performance and safer operation than those made of more commonly used alumina ceramic. Our zirconia liner is a proprietary Zirconium-based matrix that has significantly improved mechanical characteristics.
Zirconia has three important property advantages compared to alumina.
- Zirconia exhibits better impact strength.
- Zirconia is harder than alumina.
- Zirconia can be honed to finer surface finishes than alumina. Finished to 4 RMS, the zirconia liners
- provide a surface finish that's three to four times finer than alumina.
All three of these property advantages translate to lower ownership costs. The improved wear directly extends the service life of the sleeve, while the improved impact strength cuts down on the significant costs of replacing broken liners in the field. The surface finish improvements, meanwhile, have an indirect effect. The finer surface finish means less friction with the elastomer-and-metal pump pistons, which in trun extends piston life and reduces pump-cooling requirements.
- Increased impact characteristics
- Lower thermal load on the liner wash system
- Higher thermal ratings
- HP design with shoulder-on-hull to prevent sleeve slippage
- ID tolerances of +.010" / -.000"
- Surface finish of 4 - 8 RMS
- Good performance on the high temperature application
- Different Liner sizes are available
Zirconia Ceramic Liner Technical Characteristics
Material | components | density(g/cm3) | hardness(HRC) | resilience(GPa) | coefficient of expansion(10-6/K) | bending strength (MPa) | Fracture toughness(MPam1/2) |
Y-TZP | Y2O3+ZrO2≥99.5% | 6-6.05 | ≥87 | 200 | 9.6 | ≥1000 | 12-14 |
ZTA | ZrO2≥20% | 4.1-4.3 | ≥88 | 300-350 | 7.5-8.5 | ≥500 | 4-7.5 |
Double metal mud pump liner
We produce double metal cylinder using the most advanced centrifugal metal casting technology, forming a rough cylinder liner.It's inside liner and jacket tightly secure. After heating treatment and finishing lined, the inside liner has a substantial increase in hardness and roughness and it has the higher quality in the same industry-leading .
The material of cylinder liner is ZG45 steel, lined with high chromium cast iron.
The HRC of cylinder inside liner is 60-65;
| Cylinder liner diameter | F500 | F800/1000 | F1300/1600 | |||
| Dmax×L | Weight Kg | Dmax×L | Weight Kg | Dmax×L | ||
| Weight Kg | ||||||
| φ100 | φ× | 50.1 | φ222.25×365 | 65 | φ257×420 | No |
| φ110 | 46 | 60.5 | ||||
| φ120 | 41.65 | 56.3 | 90.7 | |||
| φ130 | 36.75 | 50.7 | 84.2 | |||
| φ140 | 31.85 | 44.6 | 77.4 | |||
| φ150 | 26.2 | 38 | 69 | |||
| φ160 | 20.4 | 31.1 | 61.2 | |||
| φ170 | 14.85 (Single) | 23.1(Single) | 53.65 | |||
| φ180 | 44 | |||||
| 4″ | 49.5 | |||||
| 4-1/2″ | 44.2 | |||||
| 5″ | 38.2 | 86 | 86 | |||
| 5-1/2″ | 32 | 78 | 78 | |||
| 5-3/4″ | 28.4 | 73 | 73 | |||
| 6″ | 24.85 | 68 | 68 | |||
| 6-1/4″ | 21.1 | 62 | 62 | |||
| 6-1/2″ | 17.3 | 57 | 57 | |||
| 6-3/4″ | 13.9(Single) | 53 | 53 | |||
| 7″ | 46 | |||||
| F500/350×245×290;F800/410×250×310;F1300/460×285×325 | ||||||
| Packaging box size of single cylinder liner: F500/350×245×290;F800/410×250×310;F1300/460×285×325 | ||||||
Factory show
Certifications we got
Exhibition