| LED Light Source: | SMD |
|---|---|
| Warranty(Years): | 2 |
| Input Voltage(V): | 100~244v |
| Lamp Power(W): | 16 |
| Lamp Luminous Flux(lm): | 1500 |
| Lamp Luminous Efficiency(lm/w): | 90 |
| CRI (Ra>): | 70 |
| Color Temperature(CCT): | Pure White |
| Working Temperature(℃): | 20 - 40 |
| Working Lifetime(Hour): | 25000 |
| Lamp Body Material: | Glass |
| IP Rating: | IP |
| Certification: | CE,ROHS |
| Place of Origin: | China (Mainland) |
| Brand Name: | AIFOD / DCD |
| Model Number: | T8 |
| Light-emitting surface: | 330 |
| Dimesion: | Dia26 * 1200mm |
Quick Details
Specifications
I. Introduction of LED T8 Glass Tubes
T8 Glass Tubes Introduction
This LED T8 GlassTubes uses SMD 2835 LED as light source and there are 600mm(2 feet), 1200mm(4 feet), available.
This type of LED T8 Tube adopts AC176-264V voltage input and DC36-42V output. .
Product Photo
1.LED T8(2ft) Glass light Tubes 1200mm 18W 1700lm
Fully automatic production line
1. Fully automatic production line
2. Product quality more stable
3.To turn over 10 times a day
4.Reduces the production cost
Application
LED T8 glassTubes can be applied in residential lighting, commercial lighting, office lighting, hotel lighting, factory lighting, etc.
II. Specification
T8 LED Tube Parameters
|
ITEM |
DCD-Gl-T8-060-9W |
DCD-Gl-T8-090-12W |
DCD-Gl-T8-120-16W |
DCD-Gl-T8-120-18W |
|
product |
2ft/ 0.6m LED Tube |
3ft/ 0.9m LED Tube |
4ft/ 1.2m LED Tube |
4ft/ 1.2m LED Tube |
|
Power |
9W |
12w |
16w |
18w |
|
Dimesion |
Φ26 * 580mm |
Φ26 * 890mm |
Φ26 * 1210mm |
Φ26 * 1210mm |
|
LED Chip Brand |
SMD2835 |
SMD2835 |
SMD2835 |
SMD2835 |
|
LED Quantity |
44 |
66 |
82 |
96 |
|
Luminous |
800lm |
1100lm |
1500lm |
1700lm |
|
Net Weight(g) |
100 |
150 |
200 |
205 |
|
Color Temperture |
2700 ~ 6500K |
|||
|
CRI |
Ra≥70, Ra≥80 |
|||
|
Beam Angle |
120°~ 160° |
|||
|
Input Voltage(V) |
176 ~ 264V |
|||
|
Output Voltage(V) |
36 ~ 42V |
|||
|
Power Factor |
≥0.6, ≥0.9 |
|||
|
Efficiency |
≥0.9 |
|||
|
Light-emitting surface |
320° |
|||
|
Warranty |
3years |
|||
|
Operation Temperature |
20oC to 40oC |
|||
|
Storage Temperature |
-40oC to 85oC |
|||
|
Material: |
GLASS |
|||
|
Safety Requirement |
/ |
|||
|
Environmental Directives |
/ |
|||
|
Min Packing |
60pcs |
30pcs |
30pcs |
30pcs |
|
Net Weight(kg) |
6 |
4.5 |
6 |
6 |
|
Gross Weight(kg) |
6.2 |
4.7 |
6.2 |
6.2 |
T8 LED Tube Installation
|
Single-side Power Input Installation LED Tube Wiring Diagram
Installation Instruction (1)Please turn off the power before installation (2)For refitting old fluorescent lamp, with a single-side-power-input LED tube, please re-connect your wire as the following diagram.
3) For diagram A1 loop with magnetic ballast & starter, please remove the starter first. Then connect line N and Line L to the same side socket but separately. Now you can put on the LED tube and turn it on. And the loop has been changed into the one as showed in diagram A2.
Note: You can just keep magnetic ballast as it was. However, it'll consumer some power. For saving energy, it's still suggested to remove it if your labor cost is not so high.
4) For diagram B1 loop with electronic ballast, please remove the electronic ballast first. Then connect line N and Line L to the same side socket but separately. Now your LED tube light is ready to work. And the loop has been changed into what showed in diagram B2. |
III. Package
|
|
|
IV. DCD LED Tube
Concentrated on LED Tubes
Specialized in production, R&D, design and sales on various types of LED tubes only for more than 5 years, DCD has already won trust and favor from customers at home and abroad. DCD LED tubes were widely applied in lighting retrofit replacement project, commercial lighting, industry lighting, office lighting, architecture lighting, etc.
Production Capability
With a 30,000 square meter workshop equipped with advanced machines and over 120 skilled workers, our production capability has reached up to 50K pieces of LED tube lights per month.
R&D Strength
Professional R&D team to guarantee the stable performance of products:
Chip & Packaging Team
Illuminating Efficiency Team
Electrical Engineering Team
Electronic Engineering Team
Hardware Structure Team
Industrial Design Team
We are the manufacturer of LED tubes, which enables us to offer our customers factory direct price. Meanwhile good relationship with our material suppliers, skilled staff and advanced facilities make it possible for us to quote the most competitive price.
LED Tube OEM&ODM Project
As one professional LED tube supplier in China, we can offer the turnkey LED tube solutions for our customers. OEM&ODM project is well available.