| Type: | Timing |
|---|---|
| Material: | Plastic |
| Place of Origin: | China (Mainland) |
| Brand Name: | STC |
| Model Number: | |
| Rubber Timing Belt: | Rubber synchronous belt |
Quick Details
Specifications
Type | Pitch Pb(mm) | Tooth height ht(mm) | Belt thickness hs(mm) | Angle β° |
MXL | 2.032 | 0.51 | 1.14 | 40 |
XXL | 3.175 | 0.76 | 1.52 | 50 |
XL | 5.080 | 1.27 | 2.30 | 50 |
L | 9.525 | 1.91 | 3.60 | 40 |
H | 12.70 | 2.29 | 4.30 | 40 |
XH | 22.225 | 6.35 | 11.20 | 40 |
XXH | 31.750 | 9.53 | 15.70 | 40 |
T2.5 | 2.5 | 0.7 | 1.30 | 40 |
T5 | 5 | 1.20 | 2.20 | 40 |
T10 | 10 | 2.50 | 4.50 | 40 |
T20 | 20 | 5.00 | 8.00 | 40 |
AT5 | 5 | 1.20 | 2.70 | 50 |
AT10 | 10 | 2.50 | 5.00 | 50 |
AT20 | 20 | 5.00 | 8.00 | 50 |
b) Arc Teeth Industrial Rubber Timing Belt
HTD | STPD / STS | RPD / HPPD |
Type | Pitch Pb(mm) | Tooth height ht(mm) | Belt thickness hs(mm) | Angle β° |
HTD | 2M | 2 | 0.75 | 1.36 |
3M | 3 | 1.17 | 2.4 | |
5M | 5 | 2.06 | 3.8 | |
8M | 8 | 3.36 | 6.00 | |
14M | 14 | 6.02 | 10.00 | |
20M | 20 | 8.4 | 13.20 | |
STPD/STS | S2M | 2 | 0.76 | 1.36 |
S3M | 3 | 1.14 | 2.20 | |
S4.5M | 4.5 | 1.71 | 2.81 | |
S5M | 5 | 1.91 | 3.4 | |
S8M | 8 | 3.05 | 5.3 | |
S14M | 14 | 5.3 | 10.2 | |
RPP/HPPD | 2M | 2 | 0.76 | 1.36 |
3M | 3 | 1.15 | 1.9 | |
5M | 5 | 1.95 | 3.5 | |
8M | 8 | 3.2 | 5.5 | |
14M | 14 | 6.00 | 10 |
2. Supply Characteristic | |
a).Cutting or provide sleeve according to customer's requirement.
b).Could add anti-static, heat-resistant, low temperature resistance ect.
c) Normal product no minimum order quantity requirements
3. Material & Characteristic
Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.
The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1: 10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive.
Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics.