| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | CY |
| Model Number: | 1 |
| Voltage: | 380V 50 HZ |
| Current: | direct current |
| Rated Capacity: | 120KVA*4 |
| Rated Duty Cycle: | 8 hours per day depending on local condition |
| Dimensions: | 2200*2400*1800mm |
| Weight: | 3.5T |
| Usage: | |
| Certification: | Our certifications: ISO 9001:2000, BV certification |
| After-sales Service Provided: | Engineers available to service machinery overseas |
| Name: | Automatic Wire Mesh Welding Machine Fctory Price |
| Feature: | high speed, automatic |
| wire diameter: | 2.8mm-4.5mm |
| weft wire spacing: | 50--200mm |
| welding width: | 1600mm |
| welding speed: | 45times/min |
| welding point: | 33 |
| operation: | PLC digital system |
| auxiliary systems: | bar straightener |
Quick Details
Specifications
wire mesh welding machine
1.Feature
This machine adopts synchronous control technique, separate-control welding and welding time controlled by PLC digital programming system, once pressing, and separate welding. The input panel has two types touch screen and button, making operation more intelligent and rational. The welding power is electric power, weft fed from hopper driven by steeper motor, warp fed by brake motor driven car and the mesh pulled by the stepper motor driven car. The warp and the weft are both pre-straightened and pre-cut by the special straightening machine. The biggest advantage of this machine is that there is different weft spacing in the same mesh.
2.the spcification of wire mesh welding machine
Note: special type can be mde according to the client's requirements.
3.the process of wire mesh welding machine
5.FAQ
1.Feature
This machine adopts synchronous control technique, separate-control welding and welding time controlled by PLC digital programming system, once pressing, and separate welding. The input panel has two types touch screen and button, making operation more intelligent and rational. The welding power is electric power, weft fed from hopper driven by steeper motor, warp fed by brake motor driven car and the mesh pulled by the stepper motor driven car. The warp and the weft are both pre-straightened and pre-cut by the special straightening machine. The biggest advantage of this machine is that there is different weft spacing in the same mesh.
2.the spcification of wire mesh welding machine
| Wire diameter | 2.8--4.5mm | warp form | wire coil |
| weft wire spacing | 50--200mm | weft form | wire coil |
| Warp spacing | 50--200mm | Rated voltage | 380v |
| welding width | 1600mm | Rated power | 120KVA*4 |
| Welding speed | 45times/min | Overall dimension | 2200*2400*1800mm |
| welding point | 33 | weight | 3.5T |
3.the process of wire mesh welding machine
1.Materal feeder-pre cut weft wires put into the material feeder, wires can drop automaticlly.
2.Mesh drawing frame-welded mesh on the frame and drived by a step motor. The frame can reach 6 meters long
3.Control cabinet- specifications input to control cabinet, the machine can working automaticlly.
Note:
About setting the length of the mesh, welding machine works at one time, the net will work for a mesh length, the counter will count again. Set the number on the counter ,that is to say, the length of the mesh. The counter counts to the set value, the machine will automatically stop, the net production completed
4.Package of wire mesh welding machine
1. In pallet,
2. in plastic film,
3. in nuding,
as your requirement
5.FAQ
Operating conditions
1. Temperature between - 10 ° C and + 40 ° C.
2. Height is less than 2000 meters above sea level.
3. Must not have the corrosive gas that seriously affect the insulation performance of welding machine, chemical and corrosive, explosive medium and so on in the working place
4.The wire is clean, no rust
Installation and debugging
(1) welding machine must be firmly grounded in installation, grounding resistance shall not be greater than 8 Ω.
(2) Keep enough distance with other equipment or facilities installation
(3) pay attention to add lubricant when installation and debugging, to ensure smoothly sliding.(4) before the installation must check whether there is any looseness damage on parts.
(5) have enough conductive area and the power supply cord to connect.
(6) for electronic control of various control parameters must be adjusted the right input and check.
(7) formally before welding, welding machine for no-load test, to completes the insulation between the upper and lower electrode, not short circuit, all kinds of action and correct rear can use. Earnest rigorous, don't be careless.
(8) for protect the power supply cord to ensure safe production.
maintenance:
1. Before welding,all switches and buttons must adjust to the right position to produce
2. The machine should work according to parameters and must not overload to reduce equipment fault
3. Clean the electrodes, modification or replacement, regularly in order to protect the quality of the machine.
6.Our services
NO.2 Guarantee: one year, some accessories free for you, and if the machine has something wrong, the accessories also can free to you
NO.3 Engineer can repair machine to your factory
NO.4 24 hours online after-sale service
Guarantee Period: One Year